Shoulder Harness
#1
   
Getting down to finishing everything up on the 69. Needing new ones of these. Not seeing anyone who
reproduces them. I have read that dyeing them weakens the material. Any ideas on where I can get new
or better ones? Thanks
Reply
#2
didnt realize how hard they are to find. only set i could find in a quick search.
hope it helps you out

https://secure.cougarpartscatalog.com/se...stang.html

they have the shoulder harness separate too, just browse there seat belt selections
Reply
#3
Most people just clean them with a mild soap and water.  They are not being reproduced to match original.  There are 3-point retractable kits for these cars with buckles similar to original sold through Scott Drake.  But be forewarned, the retractor assembly for the front seats are larger than original and stops the seats from being able to move fully rearward.  I couldn't use them as I need the seat as far back as possible so my knees do not hit the steering wheel.  So I reinstalled my original seat belts.

You can try Perogie Enterprises for used and maybe some NOS seat belts.  They specialize in used original and NOS parts for Mustangs.
Reply
#4
Thanks for the replies. I may have to bite the bullet on go with the new ones from the Cougar guy. He has
a really informative YouTube video on taking them apart and cleaning them. All of mine came out really well
except these two. I think I will call and see if he will just do these for me and not a whole set. I also checked
Perogie with no luck.
Reply
#5
West Coast Classic Cougars might be your best option for originals.  He's an OEM type of guy and has many good and informative videos for these cars.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
1970 mustang mirror chrome bezel nut
Last Post: Raytags
Today 06:02 AM
» Replies: 0
» Views: 50
Cam Specs
Last Post: 1969_Mach1
11-12-2019 09:23 AM
» Replies: 1
» Views: 372
Cylinder lube for a long time stored mot...
Last Post: Mister 4x4
11-10-2019 11:26 AM
» Replies: 6
» Views: 813
Been Awhile... '71 Rustang
Last Post: Mister 4x4
11-10-2019 11:12 AM
» Replies: 165
» Views: 156166
Great color combo!
Last Post: JTS71 Mach1
11-10-2019 10:49 AM
» Replies: 4
» Views: 4061
Brazing/Soldering a Brass Radiator
Last Post: 1969_Mach1
11-09-2019 03:15 AM
» Replies: 4
» Views: 214
428 CJ Commemorative coins
Last Post: Steven Harris
11-08-2019 03:29 PM
» Replies: 3
» Views: 123
transmission identification
Last Post: JTS71 Mach1
11-04-2019 09:20 AM
» Replies: 4
» Views: 5161
Kit Sullivan - RIP
Last Post: JTS71 Mach1
10-31-2019 07:37 AM
» Replies: 2
» Views: 275
Manual Trans Gear Oil
Last Post: 1969_Mach1
10-29-2019 07:18 AM
» Replies: 14
» Views: 6695
Perspective
Last Post: Steven Harris
10-22-2019 02:15 PM
» Replies: 3
» Views: 474
The Donkey
Last Post: JTS71 Mach1
10-21-2019 02:56 AM
» Replies: 0
» Views: 211
Presentation
Last Post: JTS71 Mach1
10-20-2019 08:59 AM
» Replies: 9
» Views: 787
"Jacobra"
Last Post: Steven Harris
10-19-2019 12:48 PM
» Replies: 74
» Views: 47041
Seeing the finish line.
Last Post: Steven Harris
10-19-2019 12:38 PM
» Replies: 9
» Views: 736
1971 Mach-1 - Sell or finish?
Last Post: CCinPA
10-19-2019 01:32 AM
» Replies: 31
» Views: 2874
First Show
Last Post: BLACK JADE 69
10-19-2019 01:14 AM
» Replies: 8
» Views: 587
Hens tooth (73 Urethane bumper)
Last Post: Steven Harris
10-18-2019 02:05 PM
» Replies: 5
» Views: 733
66 Fairlane Project
Last Post: Steven Harris
10-18-2019 01:33 PM
» Replies: 595
» Views: 281169
Identifying Motor
Last Post: Steven Harris
10-18-2019 01:28 PM
» Replies: 2
» Views: 877

>