69 Mach 1 rear seat install
#1
Hello, 
  New member here and this is my first post. Hoping I can get some help on this any some future questions. I made the mistake of buying a car that was already partially disassembled and now I am trying to put the pieces back together. Can anyone show me how the package tray attaches to the rear seat back support? Are these supposed to be screws or bolts and nuts?  The bottom portion of the back support attaches with 3 screws and they fold down. I'm a bit confused here because it appears as though the seat back folds down but I don't see how that could be being that it attaches to the tray?  Thanks, Rob


Attached Files Image(s)
   
Reply
#2
If it is a fold down rear seat, it does not use a package tray.  To close of the area to the trunk there is a trap door that hinges on the top, latches on the bottom, and can be opened to get more storage area.  Then there is a thin filler panel to go between the bottom of the rear glass and the top of the trap door.  From your description it sounds like you have a mix of parts, some for a fold down rear seat and some for a stationary rear seat.
Reply
#3
(05-22-2019, 11:00 AM)1969_Mach1 Wrote: If it is a fold down rear seat, it does not use a package tray.  To close of the area to the trunk there is a trap door that hinges on the top, latches on the bottom, and can be opened to get more storage area.  Then there is a thin filler panel to go between the bottom of the rear glass and the top of the trap door.  From your description it sounds like you have a mix of parts, some for a fold down rear seat and some for a stationary rear seat.

Thanks for the quick reply. I'm not 100% sure what it's supposed to be. It I think it's just a standard fixed back seat with the package tray.  The seat back is secured at the bottom with the triangular hinge and three screws each. How does the top of it secure to the package tray?  I'm not sure why the picture I posted does not capture the image and it's entirety.   Would you happen to have a picture of this area?


Attached Files Image(s)
   
Reply
#4
My 69 Mach 1 has a fold down rear seat.  I'll look through my repro Ford service manuals and see what information is there.  I also have a small assembly manual they probably has some small illustrations in it.  I'll look at that as well.
Reply
#5
(05-23-2019, 02:08 AM)1969_Mach1 Wrote: My 69 Mach 1 has a fold down rear seat.  I'll look through my repro Ford service manuals and see what information is there.  I also have a small assembly manual they probably has some small illustrations in it.  I'll look at that as well.

Thanks, that would be great.
Reply
#6
(05-23-2019, 07:49 AM)D  RostaRob Wrote:
(05-23-2019, 02:08 AM)1969_Mach1 Wrote: My 69 Mach 1 has a fold down rear seat.  I'll look through my repro Ford service manuals and see what information is there.  I also have a small assembly manual they probably has some small illustrations in it.  I'll look at that as well.

Thanks, that would be great.


Attached Files Image(s)
   
Reply
#7
My 1969 Mustang reproduction service manuals did not show details of the rear seat and package tray.  My Mustang Illustration Catalog has one diagram of that area of the interior.  The diagram is small so as best I could determine is there are sheet metal screws attaching the package tray to the rear seat back.  Here is a link to the book I have.  National Parts Depot sells it.  It has a lot of diagrams.  But they are not very large.

https://www.npdlink.com/product/book-mus...%26year%3D
Reply
#8
(05-24-2019, 09:09 AM)1969_Mach1 Wrote: My 1969 Mustang reproduction service manuals did not show details of the rear seat and package tray.  My Mustang Illustration Catalog has one diagram of that area of the interior.  The diagram is small so as best I could determine is there are sheet metal screws attaching the package tray to the rear seat back.  Here is a link to the book I have.  National Parts Depot sells it.  It has a lot of diagrams.  But they are not very large.

https://www.npdlink.com/product/book-mus...%26year%3D
Thank you. I really appreciate your help.
Reply
#9
I'm chasing up a similar question. I think you have a fixed rear seat same as mine.  On my 69 mach 1 I have two trim pieces that hold down both ends of the front of the package tray.  I think there is suppose to be another trim piece that looks like a metal rail going along the length of the rear seat and holding the entire front side of package tray. see picture attached.

Anyone know where i can purchase this trim?


Attached Files Image(s)
   
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  How much of your Mach 1 have you replaced? Mister 4x4 8 4,094 07-13-2018, 08:45 AM
Last Post: Steven Harris
  1970 Mach 1 Hood tach rlincoln0814 15 6,427 03-08-2018, 03:53 AM
Last Post: 1969_Mach1
  Just had rear window gasket installed on 69 mustang rindel 9 12,515 11-01-2015, 03:50 PM
Last Post: 1969_Mach1
  69 MACH 1 fuel cap? noroz 6 8,880 06-06-2015, 03:51 AM
Last Post: 1969_Mach1
  04 Mach 1 exhaust rattle Bogie#7 11 12,468 05-30-2015, 05:47 PM
Last Post: 1969_Mach1
  Post a Picture of What You Sold or Traded to Get Your Mach 1 Rare Pony 69 79,077 05-09-2015, 02:58 AM
Last Post: mrmach1
  2004 Mach 1 value skidmarky 10 14,589 04-20-2015, 09:19 AM
Last Post: Hpstang
  69 Mach I Brakes - Hard pedal Must69ang 4 7,724 04-15-2015, 08:31 AM
Last Post: Must69ang
  4-Link G-Link Suspension 1971-73 Mach 1 1973Mach1351C 10 13,701 02-03-2015, 09:30 AM
Last Post: 1973Mach1351C
  Tuning 2004 Mach 1 martyfras 5 8,326 01-06-2015, 01:52 PM
Last Post: JTS71 Mach1

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
72 351C starts to overheat at idle
Last Post: SteveO_71
Yesterday 12:18 AM
» Replies: 16
» Views: 2534
new autolite volt reg keeps alt light on
Last Post: 1969_Mach1
07-20-2019 01:41 PM
» Replies: 10
» Views: 450
Manual Trans Gear Oil
Last Post: martinbrown1276
07-19-2019 10:04 PM
» Replies: 13
» Views: 3412
New Member and 69 Mach 1 owner
Last Post: bob.harlan
07-19-2019 02:42 AM
» Replies: 2
» Views: 209
Stock Cam Specs - 69 351w 4v ?
Last Post: yashasvi07
07-18-2019 06:51 PM
» Replies: 71
» Views: 50206
Happy Birthday America!!!
Last Post: Mustangmike
07-05-2019 09:45 AM
» Replies: 2
» Views: 918
69 Mach 1 rear seat install
Last Post: rindel
06-29-2019 02:44 AM
» Replies: 8
» Views: 1896
1973 Mach 1 parts
Last Post: locknload
06-28-2019 12:14 PM
» Replies: 8
» Views: 3334
headers for 1969 mach 1
Last Post: rango-jr
06-23-2019 11:37 AM
» Replies: 11
» Views: 2670
Been Awhile... '71 Rustang
Last Post: Steven Harris
06-21-2019 01:52 PM
» Replies: 148
» Views: 129436
Bezel for power seat switch
Last Post: 1969_Mach1
06-21-2019 02:28 AM
» Replies: 2
» Views: 569
Happy Dad's Day!!!
Last Post: BLACK JADE 69
06-18-2019 12:31 AM
» Replies: 1
» Views: 536
No power brakes
Last Post: 1969_Mach1
06-14-2019 03:12 AM
» Replies: 5
» Views: 1065
69 Mach 1 Headlight switch reinstall iss...
Last Post: combat32
06-03-2019 11:58 PM
» Replies: 16
» Views: 3350
66 Fairlane Project
Last Post: Mustangmike
06-02-2019 11:20 AM
» Replies: 587
» Views: 233056
Is this noise normal?
Last Post: 1969_Mach1
05-31-2019 08:36 AM
» Replies: 15
» Views: 4909
What is this?
Last Post: Oztrailer
05-25-2019 07:23 PM
» Replies: 6
» Views: 1324
hdshadpar
Last Post: hdshadpar
05-24-2019 12:52 AM
» Replies: 5
» Views: 3054
Shaker Rebuild
Last Post: Bambus
05-17-2019 02:18 AM
» Replies: 12
» Views: 4362
Mustang GT Transmission Issue Overrated?
Last Post: Mustangmike
04-26-2019 07:40 PM
» Replies: 1
» Views: 2157

>