Auto Trans Dipstick
#1
This is a late model Mustang question I hope to find an answer to.  We have a 2016 Mustang with a V6 and auto trans.  It's a daily driver my wife commutes to work with.  It is already approaching 60K miles by the time it needs another engine oil and filter change.  I want to also service the trans at that time.

Question:  In Fords wisdom the only dip[stick is about 3" long and screws into the case where old school dipstick tubes use to fit, rt. front corner.  Who makes a dipstick tube and dipstick kit I can install so I am not laying under the car trying to fill and check the fluid with the engine running?  I found one from Performance Automatic, has anybody used their stuff because it looks kind of cheap.  I believe the trans model is a 6R80.  Does Ford have a dipstick and tube for slightly older Mustang that fits?


I guess this is another attempt by Ford to prevent people from doing their own service and repair work.

Thanks for any input.
Reply
#2
Mike,

Absolutely ridiculous location...

I could not find any dipstick upgrades online.  It must have been designed by the parts/service department to lure people in to spend money.   Before you know it you will have to drop the oil pan to put air in the tires!

I have my radar on so if you I see anything I will let you know.
Reply
#3
It is ridiculous.  If you have a hoist it's wouldn't be bad.  You can stand under the car while its running to check or adjust the fluid level.

In the owners manual it states the transmission is "lubed for life" and if a leak occurs to take it to a Ford service dept. to have it repaired.

Ideally, I'd like an OEM dipstick tube and dipstick from an earlier model, if they interchange.
Reply
#4
(05-30-2018, 10:08 AM)1969_Mach1 Wrote: It is ridiculous.  If you have a hoist it's wouldn't be bad.  You can stand under the car while its running to check or adjust the fluid level.

In the owners manual it states the transmission is "lubed for life" and if a leak occurs to take it to a Ford service dept. to have it repaired.

Ideally, I'd like an OEM dipstick tube and dipstick from an earlier model, if they interchange.
I am curious when the say "lubed for life" does that mean there is no longer any service requirement?  And if so, what changed that they no longer require service?

Is there enough clearance to run an old style OEM tube? It seems like everything is really tight on these new cars.
Reply
#5
I found on one forum that Ford states the fluid will last 150K and they call that "lube for life".  I guess what they are saying is the trans is expected to last 150K miles.  With that, I'm thinking Ford wants me to throw the car away at 150K miles and buy a new one.  Transmissions typically last much longer when serviced regularly and have sufficient cooling.  I tend to keep cars a very long time.  I have no interest in buying a new car every 5 years or so.  My daily driver F150 is 23 years old.  Mustangmike, your wife might call me cheap.

The 2016 Mustang has a 3.7L V6 motor and the engine compartment is big.  There is a lot of room under the hood.  I certainly didn't want a 5.0L GT for a car that is driven in commute traffic every day.
Reply
#6
This reply isn't regarding the dip stick but the company I work for purchases high voltage circuit breakers. Many manufacturers are now labelling them as "maintenance free" but they certainly are not.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Hottest Auto Tech for 2012 Rare Pony 10 9,741 02-15-2012, 01:31 AM
Last Post: bob.harlan
  MSN Auto 2011 Mustang First Ride Article Rare Pony 0 2,719 07-29-2010, 10:51 AM
Last Post: Rare Pony

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
hdshadpar
Last Post: Steven Harris
02-17-2019 02:25 PM
» Replies: 3
» Views: 167
UK Mach1
Last Post: Steven Harris
02-17-2019 02:16 PM
» Replies: 2
» Views: 185
1971 Boss 351
Last Post: Steven Harris
02-17-2019 02:10 PM
» Replies: 4
» Views: 165
Vin Decoder
Last Post: JTS71 Mach1
02-16-2019 08:53 AM
» Replies: 8
» Views: 5383
Bonnet latches
Last Post: JTS71 Mach1
02-13-2019 02:11 PM
» Replies: 2
» Views: 201
Vin decoder
Last Post: Oztrailer
02-11-2019 07:56 PM
» Replies: 1
» Views: 231
Ignition Timing
Last Post: JTS71 Mach1
02-10-2019 09:37 AM
» Replies: 23
» Views: 3976
"Jacobra"
Last Post: JTS71 Mach1
02-10-2019 09:18 AM
» Replies: 62
» Views: 14690
New Member
Last Post: Mustangmike
02-07-2019 09:25 PM
» Replies: 8
» Views: 547
Fuse Panel on my ‘69
Last Post: 1969_Mach1
02-06-2019 06:28 PM
» Replies: 3
» Views: 307
66 Fairlane Project
Last Post: Mustangmike
02-03-2019 10:42 PM
» Replies: 542
» Views: 158898
1973 Mach 1 parts
Last Post: Steven Harris
02-03-2019 06:37 AM
» Replies: 5
» Views: 574
Newbie - Just brought this baby home
Last Post: Steven Harris
02-03-2019 06:33 AM
» Replies: 5
» Views: 623
This One's Funny!
Last Post: JTS71 Mach1
02-01-2019 10:08 AM
» Replies: 2
» Views: 396
Dash ignition light?
Last Post: JTS71 Mach1
01-21-2019 10:37 AM
» Replies: 3
» Views: 801
New addition to the stable..
Last Post: Steven Harris
01-16-2019 01:26 PM
» Replies: 5
» Views: 930
Alternator Light Won't go off
Last Post: 1969_Mach1
01-06-2019 05:35 AM
» Replies: 13
» Views: 2191
Merry Christmas 2018
Last Post: Steven Harris
12-30-2018 12:56 PM
» Replies: 10
» Views: 1229
Led lights not all that good.
Last Post: John
12-28-2018 02:12 PM
» Replies: 24
» Views: 9478
"70 Mach 1 Fuel Line Routing
Last Post: 1969_Mach1
12-28-2018 06:07 AM
» Replies: 1
» Views: 624

>