wheels and tires for 1969
#1
I purchased a 1969 Mach 1 with oem wheels that I believe are 14x6 with 215x70x14 cooper tires.  I have since purchased Coker Magnum 500's with 235x60x14 on 14x7 rims.  Back space on the oem is approx 4.25.  The magnums are supposed to be also 4.25.  I measures them and appear to be 4 3/8 " ?  My purchase was based on what I had read others had done.  My front tires rub (not rims) the upper ball joint a-arm?  It is a disc brake car and everything is original.  What I did not realize before was even the oem wheels and tires are a little close to this also.  What I am learning a bit late is overall tire width, backspacing, and height are an issue with the front.  My question is would anyone know if I changed the front tires only to a 215x60x14 or 225x60x14 using the same 14x7 magnums would I gain 1/2 inch or more clearance.  Any suggestions wpuld be appreciated.  I would like to stay with 14 inch rims,but if the only way is to move up to 15"  I have 4 brand new set of never used  w & t  that I'm not sure what to do with.
Reply

#2
I've read tech tips inside Mustang Plus' catalog that 7" wide 14" diameter wheels will can cause the issues you are experiencing. I wouldn't go down to a 215-60 x 14 as that will be a small looking tire on a 7" wide wheel.  Plus it might not fit very well on the 7" wide wheel.  The overall width of a 225 is approx. 3/8" narrower than the 235 so you wouldn't gain 1/2" or more clearance.

I am still using the original 14x6 chrome styled steel wheels that came on my Mach 1.  When using Magnum 500 wheels most people select a 15"x7" Magnum 500 with stock backspacing of 4.5" and use 225-60 x 15 tires so there will be no rubbing on the wheel opening lip.

The back spacing on your new 14 x 7 wheels sounds correct.  I think stock back spacing on 15 x 7 Magnum 500's was 4.5".

You can always try one of the 215-70 x 14 Cooper tires on one of the new wheels to get an idea what a 215 tire will look like on a 7" wide wheel.  Plus, install it on the front and see what the clearance will be, if any.

Let us know what happens.
Reply



Possibly Related Threads...
Thread Author Replies Views Last Post
  1969 mach 1 - best tires to buy for steel wheel rims rindel 5 3,818 05-08-2015, 10:57 PM
Last Post: mrmach1
  Borgeson 800330 DOES fit 1969 Mach 1 351w with air Must69ang 7 7,085 09-13-2014, 10:50 AM
Last Post: Must69ang
  1969 351W Power steering pressure hose - 2 part hose? Must69ang 9 4,690 05-16-2014, 01:01 PM
Last Post: Must69ang
  Source needed for 1969 Power steering pump with reservoir Must69ang 4 3,051 05-16-2014, 01:26 AM
Last Post: Must69ang
  What wheels for a 70 Mach 1 ???? Masterblaster7212 12 10,535 03-20-2014, 03:01 AM
Last Post: Masterblaster7212
Photo 1969 front end rebuild. Mcanical 3 2,723 05-27-2012, 03:25 PM
Last Post: Mcanical
  Biggest tires on rear? 1969mustang 9 8,451 02-07-2012, 02:22 AM
Last Post: Masterblaster7212
  what wheels eric 2 2,065 10-07-2011, 03:13 AM
Last Post: eric
  Replacing rear leaf springs on a 1969 Mach 1 Mach 1 Club 2 3,916 07-12-2011, 05:14 AM
Last Post: cdesje
  Mustang 1969 Mach 1 - Chip Foose Wheels Mach 1 Club 0 3,230 01-12-2011, 11:44 AM
Last Post: Mach 1 Club

Forum Jump:


Users browsing this thread:
1 Guest(s)


Forum software by © MyBB Theme © iAndrew 2016