NEW MEMBER
#1
1970 MACH 1 RESTO-MOD; '67 427 FE SIDE-OILER; EDELBROCK PERFORMER RPM ALUMINUM HEADS & INTAKE; HOLLEY 750 CARB (soon to be FAST EFI injection); COMP CAMS SOLID LIFTER CAM & ROLLER ROCKERS; ARIAS 10.75 COMP. PISTONS; LEMANS RODS; FORGED STEEL CRANK; HOOKER SUPER COMP CERAMIC HEADERS; MARCH PULLEY SYSTEM WITH A/C; RON DAVIS RADIATOR WITH DUAL SPAL FANS & CANTON 4 QT RECOVERY TANK; TREMEC TKO 600 5-SPD TRANS & CENTERFORCE HYDRAULIC CLUTCH; TCI COIL-OVER FRONT & TORQUE TUBE REAR SUSPENSION; NARROWED 9" WITH 4.11 & STRANGE AXLES; WILWOOD 4 WHEEL DISK BRAKES & ROTORS; BOYD TOURING 18" X 8" FRONT & 18" X 10" REAR WHEELS; NITTO NT-555 245/40 ZR18 FRONT & 285/40 REAR TIRES.            
Reply

#2
Now that's one Badd Assed, Beautiful Ride! Welcome to the Club. If you did all the work yourself. you have obviously got a lot of knowledge to contribute. Jump in anytime. Beautiful Car.  Cool

JTS
"We built these cars to drive the "HELL" out of them, not to be museum pieces!"  Carroll Shelby

2008 Mustang V6 5 speed "Diablo Sport Predator" tuner, 87 octane tune. WOW!
1994 Ford F150 Shortbed
1986 Honda 450 Rebel
1995 Honda Pacific Coast
1989 Jacobra / Jag xjs
Reply

#3
(03-11-2018, 01:03 PM)JTS71 Mach1 Wrote: Now that's one Badd Assed, Beautiful Ride! Welcome to the Club. If you did all the work yourself. you have obviously got a lot of knowledge to contribute. Jump in anytime. Beautiful Car.  :cool:

JTS

That's also a good looking Mustang you've got! I love the body style of the '05 to '09. I bought and customized an '09 45th anniversary candy red model for my wife just to see it get literally wrapped around a telephone pole! But my wife didn't get a scratch on her which is all that mattered to me! I did some of the work on my '70 and I'm always adding custom parts. I have a few issues with fitment with that huge 427 FE under the hood. I hope to get some much needed info from this site dealing with these issues. Also, maybe give help to others with their issues as well. As far as adding photos to this site, i need to figure out how to shrink em down in size!
Thanks for the reply!
Reply

#4
Where in the world did you find that motor?  And one that was still rebuildable?  What color is that?  My first thought was candy apple red.  But there is not much red in it (or it's just the way is shows on my computer).
Reply

#5
I think the color issue, may be due to the camera or the computer. As the air cleaner pre filter is also kind of a pink Color and I've seen red ones but never a pink one???  If it really is A pinkish color it's definitely wild. 

JTS

Ps Thanks for the mention on my 08 Mustang. I need to update the picture as that's what she looked like when she was new. I've added a couple things since then An 07 Spolier to the Trunk lid as the 08 lays flat on the trunk and doesn't look as good. A Rousch hood scoop, full GT duals, a cold air intake, a Diablo Sport tuner and some chrome Torq Thrust wheels, with spinners. It's probably near 300 HP now and absolutely the neatest sleeper. Everyone thinks it's "just a V6" Until you blow the tires off in 1st, lay 75' of rubber in 2nd, and about 20' of rubber in 3rd. I mean this thing is in the same category as a 69 Camaro with a 327. It's an absolute blast. Thanks Again. JTS
"We built these cars to drive the "HELL" out of them, not to be museum pieces!"  Carroll Shelby

2008 Mustang V6 5 speed "Diablo Sport Predator" tuner, 87 octane tune. WOW!
1994 Ford F150 Shortbed
1986 Honda 450 Rebel
1995 Honda Pacific Coast
1989 Jacobra / Jag xjs
Reply

#6
Welcome!

Wow - what a nice car with quite the list of go goodies.  Impressive.

Looking forward to hearing more from you.
[Image: Arizona_flag_32w.gif]
Southern Arizona
Current Mustangs:
1973 Mach 1

1971 Mustang Grande
1965 Mustang
[Image: stevenharris.jpg]
http://www.mexicomissionariesofcbt.blogspot.com/
Reply



Possibly Related Threads...
Thread Author Replies Views Last Post
  New Member WVRoush 4 580 04-21-2018, 10:52 PM
Last Post: Dave R.
  Member Meets Oztrailer 13 6,443 04-05-2018, 07:39 PM
Last Post: Mustangmike
  New Member 1970 Jimjific22 7 826 03-18-2018, 06:26 AM
Last Post: Jimjific22
  New member from Germany and owner of a 1971 Mach 1 jedoens 12 1,515 01-13-2018, 02:47 PM
Last Post: Steven Harris
  new member dechampl 4 844 01-05-2018, 08:55 AM
Last Post: Steven Harris
  New member from Ohio 69RavenConv 9 6,838 10-25-2015, 11:45 PM
Last Post: gxr02190
  New Member. Hello! xcodegtcs 6 5,047 07-14-2015, 01:51 PM
Last Post: xcodegtcs
  new member metalmad 13 8,743 07-13-2015, 10:50 AM
Last Post: metalmad
  New Member MATT73 8 5,006 07-11-2015, 06:59 PM
Last Post: Mach1FatherFigure
  new member gebaux1 3 3,219 06-30-2015, 01:41 AM
Last Post: Mach1FatherFigure

Forum Jump:


Users browsing this thread:
1 Guest(s)


Forum software by © MyBB Theme © iAndrew 2016