remote mirror co ax
#1
Star 
does anyone know how to replace remote mirror co ax cable or anyone that has the replacement cable.1973 driver sport mirror remote cable Notallthere
Reply
#2
Removal is actually quite simple. The inside adjustment knob has a chrome ring/bezel around it. This simply unscrews, right tight, left loose. Once the bezel is off. Remove the passenger mirror from the door. It would be best if you had 2 people to do this, as now you have to pull gently on the mirror, (one person) while  the other person gently pushes the other end of the cable/knob through the hole, and help it as it slides under the dash, you need to go slowly, and watch exactly how the cable is routed under, and through the dash, as it needs to go back, as close as possible to the original, otherwise to many bends, or curves will cause binding in the cables, and a hard or impossible to adjust mirror. The one thing I need to ask is whats wrong with yours? Is it froze or broken? If it's frozen you can soak the cable's (3) down with some ATF on a rag and let it soak into the cables. The cables are very similar to a throttle cable on a lawn mower a wound wire metal casing with a adjustment cable through the center. Years of exposure may have just stuck them. Lubing them will very likely get it working again. you may even be able to get it working, without removing it from the car using spray lube, it's just a lot messier. I've fixed several this way. Good Luck!

JTS
Reply
#3
I have not seen replacement cables by themselves.  I have heard of people removing the cables from the mirrors but have never done it myself.  If they are simply stuck follow the suggestion of jts.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  rear view mirror button finley 5 6,432 04-04-2012, 05:47 AM
Last Post: Steven Harris
  Hey guess need mirror help Logan72mach1 12 13,024 06-10-2010, 03:45 AM
Last Post: eboxgj

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
Throwback Picture
Last Post: JTS71 Mach1
Today 04:03 PM
» Replies: 1
» Views: 12
1973 Mach 1 parts
Last Post: Oztrailer
Yesterday 07:39 PM
» Replies: 7
» Views: 1005
Will buy parts in real good condition or...
Last Post: shopcarpro
Yesterday 10:39 AM
» Replies: 2
» Views: 171
Manual Trans Gear Oil
Last Post: JTS71 Mach1
Yesterday 10:21 AM
» Replies: 11
» Views: 807
Need Data plate decode help pls.
Last Post: JTS71 Mach1
Yesterday 10:17 AM
» Replies: 3
» Views: 129
1969 Mustang Paint Codes & Colors
Last Post: JTS71 Mach1
Yesterday 12:21 AM
» Replies: 12
» Views: 13260
My 1971 Mach 1
Last Post: Steven Harris
03-20-2019 02:25 PM
» Replies: 2
» Views: 185
"Jacobra"
Last Post: Mustangmike
03-07-2019 09:03 AM
» Replies: 69
» Views: 22882
My Newest Project - My Youngest Child
Last Post: Steven Harris
03-05-2019 11:56 AM
» Replies: 39
» Views: 10193
1971 moch 1
Last Post: JTS71 Mach1
03-04-2019 07:11 AM
» Replies: 16
» Views: 1302
new member
Last Post: JTS71 Mach1
03-04-2019 07:09 AM
» Replies: 3
» Views: 342
Mallory Distributors
Last Post: Steven Harris
02-28-2019 02:58 PM
» Replies: 10
» Views: 688
hdshadpar
Last Post: Steven Harris
02-17-2019 02:25 PM
» Replies: 3
» Views: 489
UK Mach1
Last Post: Steven Harris
02-17-2019 02:16 PM
» Replies: 2
» Views: 432
1971 Boss 351
Last Post: Steven Harris
02-17-2019 02:10 PM
» Replies: 4
» Views: 694
Vin Decoder
Last Post: JTS71 Mach1
02-16-2019 08:53 AM
» Replies: 8
» Views: 6093
Bonnet latches
Last Post: JTS71 Mach1
02-13-2019 02:11 PM
» Replies: 2
» Views: 686
Vin decoder
Last Post: Oztrailer
02-11-2019 07:56 PM
» Replies: 1
» Views: 515
Ignition Timing
Last Post: JTS71 Mach1
02-10-2019 09:37 AM
» Replies: 23
» Views: 4998
New Member
Last Post: Mustangmike
02-07-2019 09:25 PM
» Replies: 8
» Views: 955

>