71-72 351C Cleveland Heads Cast Iron, barely used, are they worth anything?
#1
I have 351 Cleveland cast iron heads off a 71 or 72 motor. Should I just trash them? They were used on a remanufactured motor for about 2-3 hours but motor was no good. Took off the heads and they have been sitting in my shop. Trying to decide value or trash? Thanks!
Reply
#2
They have to be worth something to somebody.
Reply
#3
Not sure what the cash value is, but probalby worth something to someone. I don't need them, but you could offer them up for cheap or free if they pay the shipping.
Reply
#4
I had an extra set of 2v heads off my 72 that needed completely gone through and sold them on craigslist for $50.
Reply
#5
I would recommend doing some research to find out what you have. Post some photos here especially of the numbers and we can help you find that out. Surely someone like me lives nearby and would never let any Cleveland parts go by the wayside. Naughty
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  72 351C starts to overheat at idle edward24 16 7,153 07-21-2019, 12:18 AM
Last Post: SteveO_71
  351c 4spd keith1562 3 5,620 09-23-2012, 11:46 PM
Last Post: keith1562
  Is this car worth $2400??? scgamecock 22 23,672 06-10-2011, 12:17 PM
Last Post: turtle5353

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
1970 mustang mirror chrome bezel nut
Last Post: Raytags
Today 06:02 AM
» Replies: 0
» Views: 51
Cam Specs
Last Post: 1969_Mach1
11-12-2019 09:23 AM
» Replies: 1
» Views: 373
Cylinder lube for a long time stored mot...
Last Post: Mister 4x4
11-10-2019 11:26 AM
» Replies: 6
» Views: 813
Been Awhile... '71 Rustang
Last Post: Mister 4x4
11-10-2019 11:12 AM
» Replies: 165
» Views: 156170
Great color combo!
Last Post: JTS71 Mach1
11-10-2019 10:49 AM
» Replies: 4
» Views: 4061
Brazing/Soldering a Brass Radiator
Last Post: 1969_Mach1
11-09-2019 03:15 AM
» Replies: 4
» Views: 214
428 CJ Commemorative coins
Last Post: Steven Harris
11-08-2019 03:29 PM
» Replies: 3
» Views: 123
transmission identification
Last Post: JTS71 Mach1
11-04-2019 09:20 AM
» Replies: 4
» Views: 5161
Kit Sullivan - RIP
Last Post: JTS71 Mach1
10-31-2019 07:37 AM
» Replies: 2
» Views: 276
Manual Trans Gear Oil
Last Post: 1969_Mach1
10-29-2019 07:18 AM
» Replies: 14
» Views: 6696
Perspective
Last Post: Steven Harris
10-22-2019 02:15 PM
» Replies: 3
» Views: 474
The Donkey
Last Post: JTS71 Mach1
10-21-2019 02:56 AM
» Replies: 0
» Views: 211
Presentation
Last Post: JTS71 Mach1
10-20-2019 08:59 AM
» Replies: 9
» Views: 789
"Jacobra"
Last Post: Steven Harris
10-19-2019 12:48 PM
» Replies: 74
» Views: 47042
Seeing the finish line.
Last Post: Steven Harris
10-19-2019 12:38 PM
» Replies: 9
» Views: 736
1971 Mach-1 - Sell or finish?
Last Post: CCinPA
10-19-2019 01:32 AM
» Replies: 31
» Views: 2874
First Show
Last Post: BLACK JADE 69
10-19-2019 01:14 AM
» Replies: 8
» Views: 587
Hens tooth (73 Urethane bumper)
Last Post: Steven Harris
10-18-2019 02:05 PM
» Replies: 5
» Views: 733
66 Fairlane Project
Last Post: Steven Harris
10-18-2019 01:33 PM
» Replies: 595
» Views: 281175
Identifying Motor
Last Post: Steven Harris
10-18-2019 01:28 PM
» Replies: 2
» Views: 877

>