2003 Mach 1 stalls when coming to a stop
#1
2003 Mach 1 just turned 14,000 miles. Having a stalling problem when pressing in the clutch and coming to a stop. The car stalls, I am able to start it right back up, but the next time I need to come to a stop, it stalls again.

The last time it happened though I had driven the car about 25 miles on the highway. The car stalled when I got off the off ramp. I started it up again, pulled over, turned it off and let it sit for awhile. Then I was able to drive back home (about 25 miles mostly highway with maybe 4 stops to my house) and it didn't stall. Haven't driven it since because I don't want to take the chance of it stalling again. Any ideas?
Reply
#2
Just an educated guess would be the IAC, or Idle Air Control. I've had some luck cleaning them, and sometimes they need replaced. It's also a good idea to clean the entire throttle body. Hopefully it's that simple. Hope it helps. 

JTS
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  03-04 Mach 1 4.6L, 32V, Valve Cover Removal & Hydro Boost Removal Rare Pony 15 40,886 05-10-2015, 12:15 PM
Last Post: notagt
  Stalling after coming to a stop vamach1 9 20,763 03-05-2015, 04:47 PM
Last Post: 1969_Mach1
  03-04 Mach 1 custom exhaust Mach 1 Club 1 8,074 09-13-2011, 12:14 PM
Last Post: Rare Pony
  2003-2004 Mustang Mach 1 Eaton Swap Info Mach 1 Club 0 7,765 08-28-2011, 05:34 PM
Last Post: Mach 1 Club
  Project: 2004 Mach-1- Kenne Bell Equipped Mach-1 Mach 1 Club 1 9,556 01-06-2011, 11:50 AM
Last Post: 1969jimmach
  Ford Official Specifications for 2003 Mustang Mach 1 Rare Pony 0 5,996 01-23-2010, 01:31 PM
Last Post: Rare Pony

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
onepapergroup.com
Last Post: hk558hk
Today 03:26 PM
» Replies: 0
» Views: 12
nordunpowdercoating.com
Last Post: hk558hk
Today 03:24 PM
» Replies: 0
» Views: 11
nbnewsolar.com
Last Post: hk558hk
Today 03:15 PM
» Replies: 0
» Views: 9
kupa-sportswear.com
Last Post: hk558hk
Today 03:12 PM
» Replies: 0
» Views: 10
hzfuchuntyre.com
Last Post: hk558hk
Today 03:09 PM
» Replies: 0
» Views: 9
351 cj running hot
Last Post: Vroll
Today 03:07 PM
» Replies: 0
» Views: 9
fd-corn.com
Last Post: hk558hk
Today 03:06 PM
» Replies: 0
» Views: 10
btshock.com
Last Post: hk558hk
Today 03:04 PM
» Replies: 0
» Views: 8
babyshoes2022.com
Last Post: hk558hk
Today 03:01 PM
» Replies: 0
» Views: 10
antboxfurniture.com
Last Post: hk558hk
Today 02:59 PM
» Replies: 0
» Views: 9
airhank.net
Last Post: hk558hk
Today 02:54 PM
» Replies: 0
» Views: 10
Major Winter projects
Last Post: JackWagon3
05-18-2022 08:59 PM
» Replies: 47
» Views: 8408
New
Last Post: Rare Pony
05-18-2022 01:54 PM
» Replies: 2
» Views: 94
Help/advice needed!!
Last Post: JTS71 Mach1
05-03-2022 03:42 AM
» Replies: 7
» Views: 547
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
05-02-2022 01:15 AM
» Replies: 77
» Views: 130484
Base suspension alignment/setup
Last Post: JTS71 Mach1
04-27-2022 11:49 AM
» Replies: 1
» Views: 240
Dash ignition light?
Last Post: JTS71 Mach1
04-11-2022 12:46 AM
» Replies: 5
» Views: 8473
Biden had to go to Hospital
Last Post: JTS71 Mach1
04-09-2022 02:02 AM
» Replies: 0
» Views: 727
That new/old Jeep smell
Last Post: JTS71 Mach1
04-02-2022 08:28 PM
» Replies: 34
» Views: 13413
Brake Lines - Distribution Block
Last Post: JTS71 Mach1
03-28-2022 10:49 AM
» Replies: 7
» Views: 1842

>