03-03-2022, 05:49 AM
Purchased my 73 Mach 1 in June. The turn signals worked but now they don't. I have replaced the flasher and the turn signal switch. All fuses look good. I do not hear any clicking in the flasher unit when the turn signals are used. All lights are working including the hazard flashers. Any thoughts? Appreciate any assistance.
I was reading another forum on here and he fixed the problem by cleaning up the ground wires. He didn't state which ones or the locations sadly. I've already cleaned the bulb's grounds front and back and those aren't the problem because the lights still light up with the hazards. I'm pretty sure the ground is located somewhere in the dash that fixed the problem with the other guy's turn signals. Can anyone point me in the right direction?
Link to the other guy's forum: https://mach1club.com/showthread.php?tid...g#pid41288
Thanks,
Justin
I was reading another forum on here and he fixed the problem by cleaning up the ground wires. He didn't state which ones or the locations sadly. I've already cleaned the bulb's grounds front and back and those aren't the problem because the lights still light up with the hazards. I'm pretty sure the ground is located somewhere in the dash that fixed the problem with the other guy's turn signals. Can anyone point me in the right direction?
Link to the other guy's forum: https://mach1club.com/showthread.php?tid...g#pid41288
Thanks,
Justin