69 Mach 1 rear seat install
#1
Hello, 
  New member here and this is my first post. Hoping I can get some help on this any some future questions. I made the mistake of buying a car that was already partially disassembled and now I am trying to put the pieces back together. Can anyone show me how the package tray attaches to the rear seat back support? Are these supposed to be screws or bolts and nuts?  The bottom portion of the back support attaches with 3 screws and they fold down. I'm a bit confused here because it appears as though the seat back folds down but I don't see how that could be being that it attaches to the tray?  Thanks, Rob


Attached Files Image(s)
   
Reply
#2
If it is a fold down rear seat, it does not use a package tray.  To close of the area to the trunk there is a trap door that hinges on the top, latches on the bottom, and can be opened to get more storage area.  Then there is a thin filler panel to go between the bottom of the rear glass and the top of the trap door.  From your description it sounds like you have a mix of parts, some for a fold down rear seat and some for a stationary rear seat.
Reply
#3
(05-22-2019, 11:00 AM)1969_Mach1 Wrote: If it is a fold down rear seat, it does not use a package tray.  To close of the area to the trunk there is a trap door that hinges on the top, latches on the bottom, and can be opened to get more storage area.  Then there is a thin filler panel to go between the bottom of the rear glass and the top of the trap door.  From your description it sounds like you have a mix of parts, some for a fold down rear seat and some for a stationary rear seat.

Thanks for the quick reply. I'm not 100% sure what it's supposed to be. It I think it's just a standard fixed back seat with the package tray.  The seat back is secured at the bottom with the triangular hinge and three screws each. How does the top of it secure to the package tray?  I'm not sure why the picture I posted does not capture the image and it's entirety.   Would you happen to have a picture of this area?


Attached Files Image(s)
   
Reply
#4
My 69 Mach 1 has a fold down rear seat.  I'll look through my repro Ford service manuals and see what information is there.  I also have a small assembly manual they probably has some small illustrations in it.  I'll look at that as well.
Reply
#5
(05-23-2019, 02:08 AM)1969_Mach1 Wrote: My 69 Mach 1 has a fold down rear seat.  I'll look through my repro Ford service manuals and see what information is there.  I also have a small assembly manual they probably has some small illustrations in it.  I'll look at that as well.

Thanks, that would be great.
Reply
#6
(05-23-2019, 07:49 AM)D  RostaRob Wrote:
(05-23-2019, 02:08 AM)1969_Mach1 Wrote: My 69 Mach 1 has a fold down rear seat.  I'll look through my repro Ford service manuals and see what information is there.  I also have a small assembly manual they probably has some small illustrations in it.  I'll look at that as well.

Thanks, that would be great.


Attached Files Image(s)
   
Reply
#7
My 1969 Mustang reproduction service manuals did not show details of the rear seat and package tray.  My Mustang Illustration Catalog has one diagram of that area of the interior.  The diagram is small so as best I could determine is there are sheet metal screws attaching the package tray to the rear seat back.  Here is a link to the book I have.  National Parts Depot sells it.  It has a lot of diagrams.  But they are not very large.

https://www.npdlink.com/product/book-mus...%26year%3D
Reply
#8
(05-24-2019, 09:09 AM)1969_Mach1 Wrote: My 1969 Mustang reproduction service manuals did not show details of the rear seat and package tray.  My Mustang Illustration Catalog has one diagram of that area of the interior.  The diagram is small so as best I could determine is there are sheet metal screws attaching the package tray to the rear seat back.  Here is a link to the book I have.  National Parts Depot sells it.  It has a lot of diagrams.  But they are not very large.

https://www.npdlink.com/product/book-mus...%26year%3D
Thank you. I really appreciate your help.
Reply
#9
I'm chasing up a similar question. I think you have a fixed rear seat same as mine.  On my 69 mach 1 I have two trim pieces that hold down both ends of the front of the package tray.  I think there is suppose to be another trim piece that looks like a metal rail going along the length of the rear seat and holding the entire front side of package tray. see picture attached.

Anyone know where i can purchase this trim?


Attached Files Image(s)
   
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  smooth window operation on 70 Mach CUSTOMMISER 2 1,482 08-15-2022, 12:10 PM
Last Post: CUSTOMMISER
  Is your Mach 1 on Google Earth Street View? Rare Pony 2 1,891 03-05-2022, 07:30 AM
Last Post: Rare Pony
  72 Mach 1 Power Steering Pressure Hose Jelly 1 2,947 11-07-2021, 08:42 AM
Last Post: JTS71 Mach1
  Turn signal electrical issue 1970 Mach 1 flananuts 2 2,557 10-21-2021, 09:01 PM
Last Post: flananuts
  Missing rear quarter interior bracket Jelly 1 2,059 09-10-2021, 10:37 AM
Last Post: JTS71 Mach1
  '03 Mach 1 fuel pump skidmarky 1 2,733 04-29-2021, 11:06 PM
Last Post: JTS71 Mach1
  Rear Axle Gears 1969_Mach1 2 5,468 07-21-2020, 02:23 AM
Last Post: 1969_Mach1
  My rear tires are rubbing! Jonner B 17 25,969 10-05-2019, 11:21 AM
Last Post: JTS71 Mach1
  How much of your Mach 1 have you replaced? Mister 4x4 8 18,323 07-13-2018, 08:45 AM
Last Post: Steven Harris
  1970 Mach 1 Hood tach rlincoln0814 15 30,106 03-08-2018, 03:53 AM
Last Post: 1969_Mach1

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238163
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150940
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1710
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3974
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9116
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 2004
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1469
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 642
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1972
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 157096
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1088
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 3011
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1502
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1482
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8732
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1723
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3412
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21306
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1686
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15093

>