Hood Stripe removal
#1
I was wondering if there is any risk to paint in removing Hood Stripe on 70 Mach1 so as to upgrade the stripe to include the 351 numerics.  The Stripes currently looking to replace/upgrade on hood are the black borders on either side of large solid black strip under simulated air scoop.  Thanks for any advice. Confused
Reply
#2
Yes there is the potential for damage! The most effective way I've found was using a plastic scraper, and a heat gun. You'll have to work an edge loose after applying heat, and pull up on the stripe, and use the scraper to help lift the stubborn spots. It depends on how long the stripes have been on the car, as they harden slightly over time, and can be a real bugger to to get off without paint damage. With a little patience, and heat they will usually come off. If not I've done them with a single edge razor blade, but almost "always" caused damage so I don't really suggest that . Hope it helps. 

JTS
Reply
#3
Many Thanks for your reply and advice.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  1969 black hood care 29-ford-ccpu 1 7,249 08-22-2014, 10:19 AM
Last Post: Mustangmike

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
That new/old Jeep smell
Last Post: Mister 4x4
01-18-2022 11:46 AM
» Replies: 29
» Views: 8886
2003 Mach 1 stalls when coming to a stop
Last Post: JTS71 Mach1
01-17-2022 05:29 AM
» Replies: 1
» Views: 112
1972 Mach 1 Mustang
Last Post: stan
01-16-2022 01:02 PM
» Replies: 2
» Views: 320
1970 351C 4V engine, Shaker, AC, Dist-o-...
Last Post: Tim
01-14-2022 08:57 AM
» Replies: 0
» Views: 80
Check this out
Last Post: JTS71 Mach1
01-13-2022 12:39 PM
» Replies: 3
» Views: 285
Major Winter projects
Last Post: Limeyboy
01-13-2022 05:10 AM
» Replies: 32
» Views: 3255
Mexican made mustang 1972 Mach 1
Last Post: JTS71 Mach1
12-27-2021 11:11 AM
» Replies: 23
» Views: 4481
Merry Christmas
Last Post: Mister 4x4
12-26-2021 03:57 AM
» Replies: 1
» Views: 372
Merry "Christ"mas
Last Post: bob.harlan
12-26-2021 01:04 AM
» Replies: 2
» Views: 328
Mach 1 2021
Last Post: MyMach1
12-20-2021 09:33 PM
» Replies: 18
» Views: 3970
1970 351C 4V engine illustration
Last Post: JTS71 Mach1
12-17-2021 09:54 AM
» Replies: 3
» Views: 631
Cowl, Fender Apron, Radiator Support - W...
Last Post: JTS71 Mach1
12-08-2021 01:25 AM
» Replies: 14
» Views: 1681
Getting My 69 Mach 1 put back together.
Last Post: JTS71 Mach1
12-07-2021 10:33 AM
» Replies: 13
» Views: 4566
Fuel Issue
Last Post: JTS71 Mach1
12-01-2021 04:21 AM
» Replies: 11
» Views: 1918
FOR SALE. 72 Q-code
Last Post: Oztrailer
11-30-2021 06:46 PM
» Replies: 3
» Views: 621
Oil / water sensors
Last Post: Limeyboy
11-27-2021 02:35 AM
» Replies: 0
» Views: 471
Happy Thanks Giving!!!
Last Post: bob.harlan
11-27-2021 12:51 AM
» Replies: 1
» Views: 513
1970 Mustang TA black knit vinyl decor b...
Last Post: Tim
11-22-2021 03:52 AM
» Replies: 0
» Views: 508
PICTURE POSTING FOR NEWBIES!!
Last Post: Craig Pittman
11-20-2021 07:26 PM
» Replies: 8
» Views: 65956
WTB: 03/04 Azure Blue Mach 1
Last Post: Craig Pittman
11-20-2021 07:08 PM
» Replies: 3
» Views: 1222

>