66 Fairlane Project
I thought you were going to say I told you so (LOL)!  You are correct, I don't drive my cars too hard.  I think this was just a fluke.  Not surprising, these heads came with smaller 3/8" studs.  My friend has extra ARP studs this size so I am just going to fix what is broken.  The rocker arm, other than having a decent scratch on the top, is not damaged or binding and the push rod is not bent.  The wear mark on the valve stem is centered so no issues with the geometry.  Luckily the lifter did not pop out so I will back up driving this weekend.   It's funny though, because if my memory serves me correctly this was the same cylinder location of the lifter that was collapsed.  But, I put in all new lifters when I replaced the cam.
Reply
I'm getting over a touch of the flu so I didn't have it in me to say I told you so.  I had got a flu shot so it didn't get too bad.  That is odd it's the same cylinder that previously had the collapsed lifter.
Reply
(10-15-2019, 07:43 AM)1969_Mach1 Wrote: I'm getting over a touch of the flu so I didn't have it in me to say I told you so.  I had got a flu shot so it didn't get too bad.  That is odd it's the same cylinder that previously had the collapsed lifter.

I remember getting the flu one year after getting my flu shot.  Since then I have been skeptical about getting them.  However, last year I did get one. 

I think it's just coincidence about it being the same cylinder. But I remember the bad lifter being in cylinder 4.

I will have to take a belated "I told you so". Anyway, the flu is not fun so get better soon.
Reply
A few years ago I skipped getting the flu shot for the very reason you mentioned, I tend to get the flu after the shot, and I thought I'm tired of this I'll get the flu regardless.  Anyway, I got the flu so bad I spent the night in the ER.

That was half the battle.  I fairly far along recovering from surgery about a month ago to remove a small spot of melanoma from the top of my head.  The ordeal was terrifying but all is okay.  Clean margins and clean sentinel lymph node.  It's all in the rearview mirror now.  Well, except for the fact that apparently the sun doesn't like me anymore.  Laughing
Reply
Glad to hear everything is in the rearview mirror (knock on wood).  I most likely will get  flu shot next week.  As far as the sun, I have sort of grown out of it as I get older.  I prefer to stay indoors with the A/C instead of by the pool.
Reply
Amazing!

Glad to catch up on the summer's happenings.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
Lightbulb 1971 Mach 1 Restoration Project iglo1234 13 37,669 12-16-2017, 03:40 PM
Last Post: Steven Harris
  Father & Son Project Mustangmike 31 62,278 06-30-2017, 04:05 AM
Last Post: JTS71 Mach1
  $300 1971 Mach 1 project Sandman5000 10 29,341 01-22-2015, 10:30 PM
Last Post: mrmach1
  1969 Fastback resto mod project rcamire 1 10,437 01-04-2015, 09:43 PM
Last Post: Mach1FatherFigure
  72 Mach1 Restoration Project apophis3d 8 27,853 07-21-2012, 01:44 PM
Last Post: apophis3d
  Our tarmac rally racing '73 project Peter Winn 2 11,435 02-15-2012, 08:32 PM
Last Post: Oztrailer
  Klutch Has a Project Car Klutch 34 82,308 07-26-2011, 01:48 PM
Last Post: Masterblaster7212
  My 1973 Mach 1 restoration project spacedawg 6 19,148 07-12-2011, 05:52 AM
Last Post: Steven Harris
  Buy it rolling and running or a total project? ScottCash 10 32,036 05-31-2011, 01:21 AM
Last Post: Steven Harris
  71 Project Grabber Lime 5 19,624 11-10-2010, 01:24 PM
Last Post: Mach 1 Club

Forum Jump:


Users browsing this thread: 7 Guest(s)
[-]
Latest Threads
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 152521
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 2420
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 4490
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9308
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 2180
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1674
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 779
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 2170
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 159044
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1245
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 3392
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1743
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1706
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 9243
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1891
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3731
What's One More Iron In The Fire!
Last Post: Steven Harris
07-22-2022 01:39 PM
» Replies: 124
» Views: 241179
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 22474
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1842
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15577

>