Radio-Antenna jack

[BillC51x]

Replaced original AM Radio that hadn't been working with a 70 AM/8-Track Radio (ebay purchase that only needed a new belt). Using a dual cone dash speaker, so as not to be tempted to cut door panels and install speakers, and I have to admit the sound is pretty good all things considered. Question is to install antenna lead to radio is it best to gain access by removing Glove box door or is there a easier way.. There isn't a lot of play in the antenna wire nor is there much room in radio cavity to slid in back in if it was connected to the side of the radio in the first place.
Appreciate any suggestions. Many Thanks... http://mach1club.com/images/smilies/Smil...g_help.gif

[Mach1FatherFigure]

90* radio plugs are available from Tandy type stores. Maybe fit that first and then install the radio?

[BillC51x]

90* radio plugs are available from Tandy type stores. Maybe fit that first and then install the radio?

Many Thanks for the suggestion. I think I should be able to insert the Antenna jack from either under the dash possibly via the Glove box opening as the area under the dash near the radio is a bit cramped.