Set the Alignment on 1967-1973 Ford Mustangs
#1
Frontend alignment is one of the most basic adjustments we can make to our classic Mustangs, but it’s also one of the most necessary and rewarding things to get right for driving enjoyment. Sure, having proper alignment positively affects tire wear, but it also affects how the car feels while you’re driving it. That’s because the three basic adjustment specs—camber, caster, and toe—combine to create the frontend geometry that will define how the tire reacts to the road in both straight lines and through curves. The adjustments to each are relatively small, but the resulting change can be very noticeable.

To understand why, it’s important to know how each adjustment affects how the car steers. Caster is the easiest to picture using the concept of trail. Picture a shopping cart's front wheel; the steering axis is located ahead of the wheel, so when the cart is pushed forward the wheel will follow directly behind the steering axis, creating a self-straitening effect that will keep the wheel stable and easy to control while driving. If the steering axis were placed vertically above the wheels, there would be zero caster effect and the wheels would tend to wander. Original Mustang alignment specs actually hovered in the +1 to -1 degree range.

Static Camber is the amount in degrees that the top of the tire is tilted from vertical; either away from the car for positive, or toward the car for negative. Essentially this slight tilt changes how the tire tread interacts with the road, particularly when cornering and the weight of the car rolls toward the outside tires. Most modern vehicles are set with a slight amount of negative camber, which aids in cornering grip.

Static Toe is the number in fractions of an inch that the tire deviates from parallel to the centerline of the car. For rear-wheel-drive street-driven cars this measurement will pretty much always be a slight amount of toe-in to promote straight line stability. The only real exceptions are cars that are autocrossed or road raced regularly; some drivers actually prefer zero toe, or a slight amount of toe-out to promote quick turn-in and rotation. We can’t recommend that for the street, though, since it’ll result in skittish handling in general.

With that in mind, the really annoying thing is that most modern alignment shops don’t know how to handle classic Mustangs. Most shops have moved to exclusively using laser alignment systems that, while accurate, typically do not have databases that go back far enough to include ’64½-’73 Mustangs. Not that it would help much if they did since the factory alignment specs are not something we’d ever recommend using on any street-driven car; especially with radial tires. That’s because Ford’s original specs were mandated for super skinny bias-ply tires with a relatively narrow tread width, rather than the wider and taller radial tires that most Mustang drivers use now. Even with a totally stock suspension, modern tires and driving conditions mandate different settings.

If you have a knowledgeable Mustang or vintage Ford shop in your area, they’ll likely know how to alter the specs, but the good news is that you can also do it yourself with a few of the proper tools. We dropped in at Mustangs Etc. in Van Nuys, California to have expert technician Steve Miko show us how he would recommend setting the alignment on ’67-’73 Mustangs with a minimum amount of special tools.


VIEW SOURCE
http://www.mustangandfords.com/how-to/ch...-mustangs/
Reply
#2
Another great do it yourself article to have on hand.

I need to locate me some of those old alignment tools.
Reply
#3
(03-09-2016, 01:58 AM)Steven Harris Wrote: Another great do it yourself article to have on hand.

I need to locate me some of those old alignment tools.

Im back now, just trying to get used to working from home. Riding my Harley is to easy over work :)

Should have the smiles fixed this week.
Reply
#4
(03-09-2016, 12:21 PM)Mach 1 Club Wrote: Riding my Harley is to easy over work :)

I have my eye on a bike - but ..

Probably too much going on right now. Reason enough to just buy it and take a ride!
Reply
#5
(03-09-2016, 01:23 PM)Steven Harris Wrote:
(03-09-2016, 12:21 PM)Mach 1 Club Wrote: Riding my Harley is to easy over work :)

I have my eye on a bike - but ..

Probably too much going on right now. Reason enough to just buy it and take a ride!

Amen on needing to take a ride! Spring Break can't get here fast enough! It's the 21st through the 25th. Then as "Genie" from Aladdin said I"M OUTTA HERE!!! JTS 71 Mach1
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Repair 1973 Emergency Brakes 6foot4 4 14,785 03-26-2015, 10:29 AM
Last Post: Steven Harris
  Ford Engine Bolt Torque Chart Bolt Torque Spec Chart for Ford Engines Mach 1 Club 1 23,801 01-16-2014, 01:06 AM
Last Post: Steven Harris
  VIDEO - How to install a pitman arm nut: 1972 Ford Mustang Fastback Mach 1 Club 0 9,408 01-01-2012, 09:04 AM
Last Post: Mach 1 Club
  The Tach Cluster - 1971-1973 Mustang Mach 1 Club 10 62,229 05-22-2011, 11:34 AM
Last Post: turtle5353
  1971 - 1973 Mach 1, what material is the "front bumper" made of? Mach 1 Club 3 16,284 05-16-2011, 06:28 AM
Last Post: Steven Harris
  Ford Licensed Restoration Parts Mach 1 Club 0 8,816 02-04-2011, 09:13 AM
Last Post: Mach 1 Club
  Install Auto Carpet in a Ford Mustang Mach 1 Club 0 9,324 09-21-2010, 03:25 AM
Last Post: Mach 1 Club
  1969 Ford Mustang - Coupe 2 Fastback Mach 1 Club 0 9,232 08-07-2010, 03:16 AM
Last Post: Mach 1 Club
  How To Install Led Instrument Lights On Vintage Mustangs Mach 1 Club 0 7,766 10-21-2009, 03:51 PM
Last Post: Mach 1 Club
  Install a Blueprinted Suspension on your Classic Ford Mustang by Marlon Mitchell Mach 1 Club 2 14,820 09-30-2009, 02:24 PM
Last Post: Mach 1 Club

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238034
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150592
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1679
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3953
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9108
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 1992
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1464
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 640
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1964
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 156981
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1086
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 2990
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1497
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1468
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8681
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1718
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3403
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21110
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1681
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15075

>