Complete electric circuit rebuild
#1
Since some weeks I am working in totally rebuild my 1971 Mach 1 electric circuit.

I dismantled all harnesses, previous owner had good ideas but bad implemented, disconnected dash board, turn signals, switchs, and so on, there were more tape than a mummy.

I have done connection drawings for almost all equipment because 1971 Mach 1 from internet did not matched 100% with my car, I clean head lamps switch, reconnected it, made an 8 relays assembly and connect from there 2 electric coolong fans, head lamps, electric fuel pump, electric joke, RUN relay and spares.

I am installing new cables for front and back lights, new fuel sending unit, changing turn signal cam, and painting dash board before reassembly.

   
Reply
#2
Man you have patience! I needed to locate a complete wire harness for my car so the work was a little easier since the harness was restored outside of the car. Nice work...keep it up!
Reply
#3
You are right, one needs patience, also I used 4x14 or 4x12 cable co do easier, It is not so hard, I have to run 2 cables for back and 1 for front lights, with 2 electric cooling fans I ran 1 more.

Previous owner changed thing so I have to redo diagrams because original do not match, also they installed an alarm and also wrongly connected, all cables has multiple joints with different color and current capacities, so I am correcting them.

It is not so hard and cost is low, around $100.

Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Rebuild carb mrmach1 2 10,017 03-31-2015, 04:21 AM
Last Post: 1969_Mach1
  Rust Removal & Rebuild (Pedal Assembly) Steven Harris 23 53,701 11-11-2012, 12:18 AM
Last Post: keith1562

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238018
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150589
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1677
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3952
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9108
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 1992
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1464
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 640
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1964
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 156970
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1086
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 2990
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1496
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1468
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8681
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1718
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3402
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 20964
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1681
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15074

>