Need of new forum ?
#21
(10-29-2014, 07:14 PM)Mustangmike Wrote: I have a friend who is restoring his Mustang in one of those 10 x 20 portable garages on the side of his house. It works!
Also, that must be your son's Maverick, looks good!

Thanks Mike,

I figured with your build coming to a completion I might start one on the Maverick.

I rebuilt a 84 Buick T-Type once in an old carriage shed. I had to push the car out to work on it but at least it gave me a place to put in out of the weather.
Reply
#22
Ok, so I am spoiled. My shop is 12 x 12mtrs with pallet racking to the 5m roof. I have r/c air con; DVD player; 3phase power with full comfort facilities (shower/kitchen/laundry).
Just needs to be sorted (again). Yes, I will post some more pictures.

Will this whole thread start a new section, JTS71Mach1?? 23_30_106
Reply
#23
(10-29-2014, 09:31 AM)Mach1FatherFigure Wrote: Sign0175 Did I inspire this or what? Blush

I will post more (here) and also some pictures of my other projects.

In the meantime - picture size reduction 'For Dummies'.

1) Open the picture in MS Paint.
2) Select the 'Resize and Skew' menu
3) Select 'Pixles' rather than 'Percentage'
4) Make sure the 'Maintain Aspect Ratio' box is checked
5) Reduce the top number as you see fit
6) 'Save As' to preserve the original and have the reduced copy.
7) Sent it to yourself to check sizeing in an e-mail situation
8) Repeat as required.

OK this sounds like its for me. But wait when it comes to computers I are dummy!! LOL So 1st off what is "MS paint" ? And where do I find it? I have pictures I have wanted to post since I joined but I am just too challenged I guess. Crap I can rebuild an engine, trans and set up a 9" for rear end, do body work & paint my own car but I damn well cant seem to load pictures. LOL YLWHRSE
Reply
#24


OK this sounds like its for me. But wait when it comes to computers I are dummy!! LOL So 1st off what is "MS paint" ? And where do I find it? I have pictures I have wanted to post since I joined but I am just too challenged I guess. Crap I can rebuild an engine, trans and set up a 9" for rear end, do body work & paint my own car but I damn well cant seem to load pictures. LOL YLWHRSE
[/quote]


Man YLWHRSE I'm with you on that one. I can do all you mentioned, as well but I dam sure can't figure out how to resize pictures or figure out what they're talking about.------- MS paint, ---Is that something people in Mississippi use???????? Oh well you're only as smart as the shoes your standing in. JTS 71 Mach1
Reply
#25
Oh dear, I thought we spoke the same language. A110103_confused_prv wrong again!!
I'm here in WA (Western Australia, not Washington) trying to help you guys. Huh MS = Microsoft - as owned by that Gates bloke.
I'm sure you understand the 'select the menu' part. After that it is really follow yer nose.
I went down from 1320 (approx) pixels to about 4-500, but keep the 'Aspect Ratio' box ticked. Takes a couple goes to get the hang of it but once you have it you will be able to impress your kids.

I've rebuilt Jaguar twin OHC engines, BMW single OHC engines, manual gearboxes, tuned twin and triple SU's. Can't do autos or rear axles. And I still cheat and get the daughter to set up my mobile phone, my welding skills are nil and my spraying skills make a good tradesman ROFL.
Reply
#26
M1FF I was being sarcastic (AKA) "A Smartass" And I 'am fairly computer literate, but I just have not figured out how to resize these pictures. So I was Being a smartass instead. Sorry for the confusion. A110103_confused_prv Us Americans sometimes do that, instead of just admitting we are dumb. We make a sarcastic comment instead. Hope this helps. 578254 JTS 71 Mach1
PS yes I know what MS paint is.
Reply
#27
I was sort of wondering about the computer skills of senior site staff. I wasn't quite sure how to respond - still - no hurt; no foul; play on.

I really hope my 'It worked for me' how to is of use to all.

OK my dumb question - what does YLWHRSE mean?
Reply
#28
I could let him tell you ------ But It's Short for Yellow Horse. I'm assuming his Mustang (horse) is Yellow. If not he'll have to clarify it himself. Just my 2 cents. JTS 71 Mach1
Reply
#29
Yes that is exactly correct. YLWHRSE is the name I gave my very first Mach 1 I bought while growing up in Denver Colorado. I purchased the car with paper route money without telling my dad. Made the deal with the lady who owned the car and made monthly payments for a year. Then informed my dad he had to go help me bring it home, I was 13 then and couldn't drive it. The car was rough and over 3 years I cut my teeth on it learning body work, paint work, engine work ect and started driving it when I was 16. YLWHRSE was the letters I had on the vanity license plate and yes I painted it competition yellow. Modified the engine e several times over my high school career and raced it a bandomeir speedway. Best pass in my senior year was 11.97 at 109. I loved that car and wish I still had it. I will have another one the same year but I just haven't found d the right candidate yet. The name stuck and I've used it ever since. My current Mach 1 a 1972 I just painted yellow so it fits. It was a green metallic car originally and was white when I bought it, but now once again is a yellow horse. YLWHRSE
Reply
#30
Cool Man Cool! I love a great story, I thought there might be more to it. It's just unusual enough to be a perfect fit. Awes JTS 71 Mach1
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  69stang forum Dave R. 3 14,317 03-26-2017, 02:47 PM
Last Post: Steven Harris
  Been away from the forum for a while Mach1Guy 6 17,907 07-14-2011, 05:58 AM
Last Post: Mach 1 Club

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238059
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150863
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1688
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3957
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9109
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 1995
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1466
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 640
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1964
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 157029
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1086
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 2996
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1498
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1474
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8718
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1719
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3403
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21264
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1685
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15080

>