Tool Kit Suggestions
#1
How about a thread to help people who are just starting to get into vehicle maintenance and then maybe restoration choose tools suitable to their needs?
Sort of steering people clear of getting 1/4 to 3/4 drive socket sets if all they want to do is change globes, fuses and the odd fan belt.
Reply
#2
It looks like you have started it!

Good idea. I am sure that here in the U.S. it is probably much easier to come up with some basic tool kits much easier than in other parts.

I started with a basic Craftsman set and built from there for both myself as well as my children. Specific use tools have followed as the need demanded it.
Reply
#3
OK. I started with a 'Williams' kit of all the popular sizes in Metric, Imperial and Whitworth. It cost me 40 UK Stirling in 1969. I still have some items from that set including the box.
I now spread over 2 huge White boxes plus a drive through gantry and loads of other items. It stands me in at about Au$44k at the moment.
Getting back to 'Where to start?' - I would suggest a Stanley 3/8 and 1/2 drive set plus the Stanley 13 piece screwdriver set.
That would allow a novice to tackle most everday jobs and simple service proceedures like an oil change, radiator hose and fan belt replacement.
After that start thinking about a floor jack and stands.
Any one like to comment on those suggestions? I think it's a good starting point.
Once you cover the everyday stuff you move on to 1/4 and 3/4 drive, puller sets, test meters, compressor, rattle gun, torque wrech(s) etc.
Just as a couple of side notes: My daughter wore a Snap-On 1/4" and 6mm combination spanners as jewlery for 5 years at High School AND currently if I join all my socket set extensions together it totals over 12 feet.
A man needs an obsession. Notallthere
Reply
#4
Hey! what's a man without his, Rolleyes "TOOL" Rolleyes Oh excuse me that's tools! JTS 71 Mach1
Otherwise pretty good list for starters, a good quality set of pliers, dykes, and channel locks also are pretty handy
Reply
#5
As the saying goes "the most important tool to own is the one you don't have". Same as Steve, I started off with the bare minimum and worked my way out from there.

One tool I found to be very useful is a tap & die set. I am a big fan of chasing threads. A freshly chased bolt is a happy boltBiggrin
Reply
#6
(10-10-2014, 11:40 AM)Mustangmike Wrote: One tool I found to be very useful is a tap & die set.

Mike, what brand of tap and die set have you found to be affordable yet quality?
Reply
#7
(10-10-2014, 02:45 PM)Steven Harris Wrote:
(10-10-2014, 11:40 AM)Mustangmike Wrote: One tool I found to be very useful is a tap & die set.

Mike, what brand of tap and die set have you found to be affordable yet quality?

I have the 19 piece craftsman set which is a pretty basic set with both coarse and fine thread taps and dies. Price wise I think it runs about $35 at Sears but I usually wait for their sales (i.e Father's Day).

In my neck of the woods there is a tool store called Harbor Freight and they offer like a 100 piece tap and die set for $30 or so. Not sure of the quality but it is usually a hit or miss with this store.

I am thinking of actually purchasing a thread chaser tool. I believe I have seen them offered at Eastwood. It probably makes more sense and it would save on my taps.
Reply
#8
Thread Chasing/Cutting:
Most times for tasks I found I was chasing rather than cutting so the cutting quality of taps and dies did not really matter.
As time passed I got the thread chasing set from Snap-On and P&N taps and dies as I needed them rather than in a set.
Still find I use the chasers MUCH MORE than the cutters.
PS. Always use cutting lube - Better finish and less wear.
PPS. I will post the Stanley set numbers for a suggestion to those who may be looking.
Reply
#9
(10-11-2014, 11:19 AM)Mach1FatherFigure Wrote: Thread Chasing/Cutting:
Most times for tasks I found I was chasing rather than cutting so the cutting quality of taps and dies did not really matter.
As time passed I got the thread chasing set from Snap-On and P&N taps and dies as I needed them rather than in a set.
Still find I use the chasers MUCH MORE than the cutters.
PS. Always use cutting lube - Better finish and less wear.
PPS. I will post the Stanley set numbers for a suggestion to those who may be looking.

Absolutely correct M1FF! I agree so I am asking Santa for a chaser this this year. But, my dies have fixed quite a few bolts that had seen their day! I really really try to use OEM parts as much as I can. So it is worth it to me to run the tap and die to correct the threads. I have gone as far as taking a file to them and it actually works.
Reply
#10
Snap on and several other companies sell "thread files" They are square and have file teeth to match thread pitch, (number of threads per inch). They also have a metric file just like it, for metric bolts an threads. I don't remember sears having those? But definitly a valuable tool. Works great on front wheel drive axles when you bugger up the threads. JTS 71 Mach1
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  SUGGESTIONS WANTED!! Mach 1 Club 27 70,507 12-31-2014, 07:43 AM
Last Post: jrpav
  SellMyMustang.com Suggestions PLEASE! Mach 1 Club 7 24,257 04-17-2012, 03:52 AM
Last Post: Mach 1 Club

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238034
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150592
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1679
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3953
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9108
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 1992
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1464
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 640
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1964
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 156981
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1086
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 2992
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1497
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1468
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8681
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1718
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3403
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21110
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1681
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15076

>