Tool Kit Suggestions
#1
How about a thread to help people who are just starting to get into vehicle maintenance and then maybe restoration choose tools suitable to their needs?
Sort of steering people clear of getting 1/4 to 3/4 drive socket sets if all they want to do is change globes, fuses and the odd fan belt.
Reply
#2
It looks like you have started it!

Good idea. I am sure that here in the U.S. it is probably much easier to come up with some basic tool kits much easier than in other parts.

I started with a basic Craftsman set and built from there for both myself as well as my children. Specific use tools have followed as the need demanded it.
Reply
#3
OK. I started with a 'Williams' kit of all the popular sizes in Metric, Imperial and Whitworth. It cost me 40 UK Stirling in 1969. I still have some items from that set including the box.
I now spread over 2 huge White boxes plus a drive through gantry and loads of other items. It stands me in at about Au$44k at the moment.
Getting back to 'Where to start?' - I would suggest a Stanley 3/8 and 1/2 drive set plus the Stanley 13 piece screwdriver set.
That would allow a novice to tackle most everday jobs and simple service proceedures like an oil change, radiator hose and fan belt replacement.
After that start thinking about a floor jack and stands.
Any one like to comment on those suggestions? I think it's a good starting point.
Once you cover the everyday stuff you move on to 1/4 and 3/4 drive, puller sets, test meters, compressor, rattle gun, torque wrech(s) etc.
Just as a couple of side notes: My daughter wore a Snap-On 1/4" and 6mm combination spanners as jewlery for 5 years at High School AND currently if I join all my socket set extensions together it totals over 12 feet.
A man needs an obsession. Notallthere
Reply
#4
Hey! what's a man without his, Rolleyes "TOOL" Rolleyes Oh excuse me that's tools! JTS 71 Mach1
Otherwise pretty good list for starters, a good quality set of pliers, dykes, and channel locks also are pretty handy
Reply
#5
As the saying goes "the most important tool to own is the one you don't have". Same as Steve, I started off with the bare minimum and worked my way out from there.

One tool I found to be very useful is a tap & die set. I am a big fan of chasing threads. A freshly chased bolt is a happy boltBiggrin
Reply
#6
(10-10-2014, 11:40 AM)Mustangmike Wrote: One tool I found to be very useful is a tap & die set.

Mike, what brand of tap and die set have you found to be affordable yet quality?
Reply
#7
(10-10-2014, 02:45 PM)Steven Harris Wrote:
(10-10-2014, 11:40 AM)Mustangmike Wrote: One tool I found to be very useful is a tap & die set.

Mike, what brand of tap and die set have you found to be affordable yet quality?

I have the 19 piece craftsman set which is a pretty basic set with both coarse and fine thread taps and dies. Price wise I think it runs about $35 at Sears but I usually wait for their sales (i.e Father's Day).

In my neck of the woods there is a tool store called Harbor Freight and they offer like a 100 piece tap and die set for $30 or so. Not sure of the quality but it is usually a hit or miss with this store.

I am thinking of actually purchasing a thread chaser tool. I believe I have seen them offered at Eastwood. It probably makes more sense and it would save on my taps.
Reply
#8
Thread Chasing/Cutting:
Most times for tasks I found I was chasing rather than cutting so the cutting quality of taps and dies did not really matter.
As time passed I got the thread chasing set from Snap-On and P&N taps and dies as I needed them rather than in a set.
Still find I use the chasers MUCH MORE than the cutters.
PS. Always use cutting lube - Better finish and less wear.
PPS. I will post the Stanley set numbers for a suggestion to those who may be looking.
Reply
#9
(10-11-2014, 11:19 AM)Mach1FatherFigure Wrote: Thread Chasing/Cutting:
Most times for tasks I found I was chasing rather than cutting so the cutting quality of taps and dies did not really matter.
As time passed I got the thread chasing set from Snap-On and P&N taps and dies as I needed them rather than in a set.
Still find I use the chasers MUCH MORE than the cutters.
PS. Always use cutting lube - Better finish and less wear.
PPS. I will post the Stanley set numbers for a suggestion to those who may be looking.

Absolutely correct M1FF! I agree so I am asking Santa for a chaser this this year. But, my dies have fixed quite a few bolts that had seen their day! I really really try to use OEM parts as much as I can. So it is worth it to me to run the tap and die to correct the threads. I have gone as far as taking a file to them and it actually works.
Reply
#10
Snap on and several other companies sell "thread files" They are square and have file teeth to match thread pitch, (number of threads per inch). They also have a metric file just like it, for metric bolts an threads. I don't remember sears having those? But definitly a valuable tool. Works great on front wheel drive axles when you bugger up the threads. JTS 71 Mach1
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  SUGGESTIONS WANTED!! Mach 1 Club 27 39,614 12-31-2014, 07:43 AM
Last Post: jrpav
  SellMyMustang.com Suggestions PLEASE! Mach 1 Club 7 13,011 04-17-2012, 03:52 AM
Last Post: Mach 1 Club

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
manteau noir femme
Last Post: RyanTate
Today 02:04 PM
» Replies: 0
» Views: 15
chaussure nike foot
Last Post: RyanTate
Today 02:00 PM
» Replies: 0
» Views: 21
puma rs x toys
Last Post: RyanTate
Today 01:57 PM
» Replies: 0
» Views: 12
Been Awhile... '71 Rustang
Last Post: Mister 4x4
Today 10:42 AM
» Replies: 176
» Views: 208512
Pulling the motor
Last Post: JTS71 Mach1
Yesterday 07:40 AM
» Replies: 7
» Views: 140
Fuel pump & carb replacement
Last Post: Tom W
07-07-2020 08:41 PM
» Replies: 5
» Views: 166
The 2021 Ford Mustang Mach 1 Is Back Wit...
Last Post: JTS71 Mach1
07-07-2020 09:31 AM
» Replies: 5
» Views: 383
1969 Mach1 Parking light socket with wir...
Last Post: JTS71 Mach1
07-07-2020 09:29 AM
» Replies: 1
» Views: 90
Ford unveils 2021 Mustang Mach 1
Last Post: Mister 4x4
07-06-2020 06:17 AM
» Replies: 2
» Views: 655
Happy Father's Day
Last Post: JTS71 Mach1
06-22-2020 01:24 AM
» Replies: 0
» Views: 277
2021 Ford Mustang Mach 1 builds a bridge...
Last Post: Mach 1 Club
06-17-2020 01:20 AM
» Replies: 0
» Views: 566
Daddy's Home!
Last Post: JTS71 Mach1
06-09-2020 12:05 PM
» Replies: 0
» Views: 3126
Need paint match advise from expert auto...
Last Post: Mustangmike
06-07-2020 11:55 PM
» Replies: 2
» Views: 1031
Tool Kit Suggestions
Last Post: AGON123
06-05-2020 05:55 PM
» Replies: 25
» Views: 36966
Spark plugs
Last Post: JTS71 Mach1
05-28-2020 02:45 AM
» Replies: 11
» Views: 2691
Memorial Day
Last Post: JTS71 Mach1
05-26-2020 04:47 AM
» Replies: 0
» Views: 1416
WTB 69-70 Fastback Quarter Window Latch ...
Last Post: SWPruett
05-19-2020 11:11 AM
» Replies: 2
» Views: 1424
Heater Box Question
Last Post: bob.harlan
05-18-2020 02:23 AM
» Replies: 2
» Views: 1356
Brassiere
Last Post: JTS71 Mach1
05-17-2020 05:44 AM
» Replies: 0
» Views: 2939
Why I'm in Love with my car
Last Post: carmans69
05-01-2020 03:19 PM
» Replies: 5
» Views: 1976

>