Introduction
#1
Hello Everyone,
My name is Richard and I am just getting back into Mustangs My first was a 72 Gold Glow Mach1 I called GoldRush hence the username.
Went through four Fox bodies and now getting ready to start a replacement 72 Mach 1 that will be a long term retirement project for my wife and I. Looking forward to sharing and re-learning a lot.
RichNew
Reply
#2
Welcome to the club. A Mach 1 is a great retirement project. We restored our Mach 1 , had it back on the road in 2008, it's still a work in progress and I retired in 2010. We are enjoying driving it again and going to shows.
Reply
#3
Welcome Rich,

Glad you have found our Mach 1 site.

Do you all ready have the Mach 1 to restore or are you currently on the hunt for the right car?

All the best with the project and share with us the day to day results.
Reply
#4
Welcome to the club from Virginia !! we are all glad to have you here to share any knowledge you have and maybe get some hints here and there Biggrin dont be shy post up some pictures !!
Reply
#5
SSig_welcome4 Nice start to a retirement. I'm still young enough(55) to think "Re tire ment" means my Mach1 needs new back tires! 3gears JTS 71 Mach1
Reply
#6
Finalized purchase of my new project car, a 73 Mach1 Q-code vin 3F05Q155299 Now waiting on the shippers to get it from Ohio to Florida. Then the fun begins.
Rick
Reply
#7
Good on you Rick.

Hopefully one out of Florida will not have near the problems that an Ohio car would have.

Keep us posted on how it all goes.
Reply
#8
Unfortunately it is coming from Ohio with some of the normal northern problems. Floor pans and trunk have rust as does the lower quarters but nothing that can't be replaced. I look at it as another one saved from the reaper to be enjoyed for many more years.

GitR-Done
Reply
#9
(11-08-2013, 05:59 AM)GoldRush72 Wrote: Finalized purchase of my new project car, a 73 Mach1 Q-code vin 3F05Q155299 Now waiting on the shippers to get it from Ohio to Florida. Then the fun begins.
Rick

Rick, where in Ohio - just womdering if I know the car
Don
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  re-introduction dk fuelish 1 6,154 04-04-2018, 01:19 AM
Last Post: bob.harlan
  introduction goldmach1 4 9,022 04-03-2018, 10:18 AM
Last Post: Mustangmike
  72 hour post (introduction) Michigan Mach1 5 14,769 04-11-2014, 05:16 AM
Last Post: Rare Pony
  Introduction murph59 4 11,501 10-08-2013, 03:28 AM
Last Post: BLACK JADE 69
  Introduction -Op- 8 20,117 02-24-2013, 04:59 AM
Last Post: Steven Harris
  Introduction Bill Lipstreu 3 9,819 02-15-2012, 10:55 AM
Last Post: Rare Pony
  Introduction... keith1562 10 22,198 07-13-2011, 12:44 AM
Last Post: keith1562
  Introduction - New Member Dan Nichols 6 17,611 03-30-2010, 01:14 PM
Last Post: Mach 1 Club

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238144
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150926
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1705
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3965
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9114
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 2003
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1467
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 640
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1971
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 157073
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1087
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 3005
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1501
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1482
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8728
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1720
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3411
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21300
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1686
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15088

>