RPM at 60mph / Tach issues
#1
Hello!

351 C 4v and 4 speed toploader with 3:50:1 rear end gears, correct factory options.

Anyone else running the same that can tell me what RPM`s you have at around 60mph, or 50mph?

My tach seems a little high, almost 4000rpm at 60mph.
It seems that above 3000rpm the tach lives its own life.

When cruising at 50 - 60 mph and then give full throttle the tach drops about 1000-1200 before it starts climbing again, and when letting my foot off the pedal the tach will move up about 1000rpm.

Engine runs great.

Running stock distributor and coil.
Reply
#2
To answer your question exactly you will also need to plug in your tire diameter. I would guess that you should be running about 2,230 RPM at 55 MPH or 2,433 at 60 MPH.

Here is how to figure it our exactly:

First find your tire diameter. I will use a 235/75R 15 for an example. Take your metric width size (235) and divide by 25.4 to convert to inches. You now have 9.25" (235 / 25.4). The 75 of the above tire size is a width/height ratio. Take your height of 9.25" and multiply by .75 (the ratio) and you end up with 6.94". Multiply that by 2 (the upper and lower portion of a tire height, now we have 13.88" and then add our rim height of 15" and we end up with an overall tire height of 28.88" Of course the actual height will be a little less as all pneumatic tires have flex.

So our 235/75R 15 translates to a 28.88" height and 9.25" width.

Take those know figures and plug them into an engine RPM calculator such as this (I'll not bore you with more calculations). http://www.csgnetwork.com/multirpmcalc.html

So with the above tire you should be running between 2,230 to 2,270 RPM's at 55 MPH and between 2,433 to 2,475 RPM's at 60 MPH.
Reply
#3
ThanksBiggrin

Im supposed to run at 2822 rpm at 60mph, according to the calculator.
That makes sence, because when my tach reads almost 4000rpm at 50-60mph, it droppes 1000-1200 when i push the pedal to the floor, making around 2800 +/- rpm at 60mph +/-.

Its tempting to make a Tremec T5z WC swap Biggrin
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  1970 Mach 1 Hood tach rlincoln0814 15 30,434 03-08-2018, 03:53 AM
Last Post: 1969_Mach1
  73 mach tach crendave 5 15,855 08-03-2012, 01:07 PM
Last Post: rvrtrash
  Carb Issues jps280zx 5 15,332 05-05-2012, 12:36 PM
Last Post: Steven Harris
  MSD and stock Tach Limoman7 5 17,111 03-11-2012, 02:57 PM
Last Post: Limoman7
  New member and tach issues 71 mach 1 kasnick 6 18,375 02-14-2012, 03:03 PM
Last Post: Machman
  brake booster/tach question paul cass 4 16,236 01-04-2012, 03:27 AM
Last Post: JTS71 Mach1
  Tranny Issues Robertb40 9 23,430 10-17-2011, 11:11 AM
Last Post: Robertb40
  HEI...FACTORY TACH... keith1562 2 9,416 09-18-2011, 10:20 AM
Last Post: JTS71 Mach1

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 152508
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 2408
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 4489
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9306
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 2176
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1672
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 778
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 2168
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 159036
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1244
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 3389
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1743
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1705
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 9241
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1889
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3718
What's One More Iron In The Fire!
Last Post: Steven Harris
07-22-2022 01:39 PM
» Replies: 124
» Views: 241162
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 22471
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1840
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15574

>