NEW MEMBER
#1
Hello folks.....I'm proud to be a new member and I hope to gain knowledge here on restoring my '69 Mach1...It's meadowlark yellow and primer! .... it has the shaker option, someone installed a 351C in the past but it originally came with a 351W. I bought the car about 2 years ago. When I got it home I ordered new door panels, new dash, new upholstery and new full length floor plans but I haven't installed any of it yet. The car has a toploader 4 speed but it pops out of second gear. I got discouraged with it after that and started working on my 63.5 fastback galaxie again. I think I have the patience to finish my Galaxie but I may have bitten off more than I can chew with the Mach1....Hopefully this site will get me motivated to restore it or if not find a buyer for it. I love 1967 thru 1970 fastback mustangs and if I sell mine I may just buy one already restored.

I'm glad this site is available...it was much needed.

Yall take care,

Billy
Reply
#2
Welcome from TN/KY! Put some pics up of the mach and galaxie when you can! Hopefully you stick with the car unless you favor the earlier fastbacks more so. I will have plenty of motivation being handed out when I get home in may/june time frame and start on my running project. Ask any questions you want :)
Reply
#3
Welcome to the site from Virginia. I think you will provide plenty of motivation here so you can finish up your 69. Post up some pics of both cars when you get a chance.
Reply
#4
SSig_welcome4 From Arkansas, You shouldn't have any trouble finding motivation here. We have an awful lot of helpful people, and there are several looking for a 69 Mach 1. So if you decide to concentrate on the Galaxie, you shouldn't have much trouble handing the Mach1 off to a new owner. Good Luck with it either way. JTS 71 Mach1
Reply
#5
Welcome.

Look around the site and you'll find tons of motivation. Your 69 doesn't sound all that bad off compared to some that you'll find. Follow the build and see the results and you will be MOTIVATED!

I love the 69 style. I also love the 351C and can understand that swap. I also love the stick shift (top loader). What you have is close to an ultimate build from my perspective.

But everyone has their limit at a given time in life - understood. Should you not be able to continue as was previously mentioned someone is always looking for the 69/70 Mach 1's. You should be easily able to move it and put the funds into an earlier fastback (nothing wrong with those either!).

Please do post some pictures of both the cars mentioned. Regardless of how it all goes please jump on in and enjoy the site.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  New member from San Jose, CA jbhoot 12 4,489 05-09-2023, 08:39 AM
Last Post: JTS71 Mach1
  New Member Phillip Morris 2 1,743 08-20-2022, 11:18 AM
Last Post: JTS71 Mach1
  New member and Mach 1 owner bterry29 3 3,077 02-09-2022, 02:06 PM
Last Post: JTS71 Mach1
  New Member with New Mach1 BigE 2 2,331 01-27-2022, 12:29 PM
Last Post: JTS71 Mach1
  New member from Virginia, 23322 seu318 3 2,708 01-26-2022, 03:57 AM
Last Post: JTS71 Mach1
  New member mccuner 4 3,484 09-18-2021, 07:09 AM
Last Post: Steven Harris
  New Member, New Stang, New Questions Wyatt 3 3,288 09-18-2021, 06:51 AM
Last Post: Steven Harris
Wink New Member Equip 2000 4 3,583 09-09-2021, 10:01 AM
Last Post: JTS71 Mach1
  new member here NoOnesHero 6 8,342 03-15-2021, 04:30 AM
Last Post: 390mach1
  New Member in New Zealand Mustang64 5 4,861 03-13-2021, 12:47 PM
Last Post: Mustang64

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 152511
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 2413
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 4489
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9307
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 2178
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1673
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 778
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 2169
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 159039
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1244
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 3392
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1743
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1706
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 9241
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1889
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3718
What's One More Iron In The Fire!
Last Post: Steven Harris
07-22-2022 01:39 PM
» Replies: 124
» Views: 241166
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 22472
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1841
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15575

>