1972 project cobra Jet Q Code
#1
After putting in a new power steering fluid hose, the steering wheel has way too much play in it. Its actually a bit scary...way too loose. Any suggestions?
--It says to use tranny fluid (we used F type).
If the car is on, but not moving, like a stop sign, the steering wheel is hard to turn, as soon as you give it some gas and go, its super loose...hope that helps. We will check your suggestions this weekend...thanks guys....

VANESSA


Attached Files Image(s)
   
Reply
#2
Did this just start after replacing the hose, if not check the rag joint in the steering column. It's a rubber bushing that goes bad after all these years.
Reply
#3
If the rag joint is good the steering box free play can be adjusted. It is located on top of the steering box. It has a slotted screw and an 11/16 lock nut. Put the wheels straight ahead. Loosen the lock nut turn the slotted screw clockwise, (while holding the lock nut) until it's snug. back the slotted screw off 1/4 turn and tighten the lock nut. Start the car and work the wheel back and forth to see if you have a tight or snug spot in the steering. If it feels ok, drive the car, see if the steering still feels ok. your done. If you feel a snug spot, you will have to back the slotted screw off a little at a time. I would suggest about 1/8 turn at a time. The idea is to take out all the slack without feeling the tight spot. If you can't get enough slack out, you need to check all the steering linkage and repair as necessary. If you still have slop replace the gearbox as the worm gear is worn. Hope this helps. JTS 71 Mach1
Reply
#4
Both great recommendations!

Another tip to help tighten up the steering would be to make sure to grease all grease-able joints. Do a visual check on all components and see what shows itself.

Let us know how it all goes.
Reply
#5
Check the rag joint, new member jman1 had the same problem. Very dangerous.
Reply
#6
After just a new hose ?
What kind of fluid was used to refill it?
Wrong fluid ? mixed ?

Agree with others check rag joint
You may have to adjust the box per JTS71 mach1 info

Good info / write up from JTS71

Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238065
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150872
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1688
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3957
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9112
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 2002
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1466
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 640
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1966
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 157032
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1086
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 2999
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1498
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1476
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8720
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1719
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3404
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21264
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1685
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15082

>