rear view mirror button
#1
I need info on installing rearview mirror button.Had a new windshield installed during repaint and there was no button on new windshield.could someone measure where the button is and help a friend out.I have a 1973 Mach 1.
i attached some pics and am learning how to shrink pics


Attached Files Image(s)
       
Reply
#2
A very clean and nice looking 73 Mach 1.

I am not close to my Mach 1 and do not have that measurement. Someone else will be along shortly.
Reply
#3
                    trying to add pics again
Reply
#4
Nice looking Mach 1!

On my 73 Convertible the center of the mirror button is 5 1/2 inches down from the edge of the outside windshield molding. The convertible has wider molding than the Mach's so not sure how that would translate.

Another measurement from the bottom of the Sun Shading tinting is 1 !/2 inches below the bottom of the tint to the center of the button. Mine is the original factory windshield (and mirror) and the total height of the sun shading is 4 inches.

My windshield molding has a seam dead center of the windshield and the mirror is centered under that seam.

Maybe the picture below will help too.

Hope this helps.

[Image: DSCF8162.jpg]
Reply
#5
Thank you Rare Pony but I think your mustang has a different size windshield. Also thanks for the advise on the aliuiun wheels(about 6 months ago) but I chose not to polish mine.I didnt like the look. Ive had this car since it was new and the wheels never looked like yours.Your wheels do look good and so does your mustang.Nice sharp car.


Attached Files Image(s)
   
Reply
#6
I took these measurements the last time I was up to the U.S. and with my Mach 1. This is a replacement windshield but the button came factory installed.

The pictures turned out dark. I believe the side to button measurement was 25"


Attached Files Image(s)
       
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Is your Mach 1 on Google Earth Street View? Rare Pony 2 1,883 03-05-2022, 07:30 AM
Last Post: Rare Pony
  Missing rear quarter interior bracket Jelly 1 2,058 09-10-2021, 10:37 AM
Last Post: JTS71 Mach1
  Rear Axle Gears 1969_Mach1 2 5,463 07-21-2020, 02:23 AM
Last Post: 1969_Mach1
  My rear tires are rubbing! Jonner B 17 25,941 10-05-2019, 11:21 AM
Last Post: JTS71 Mach1
  69 Mach 1 rear seat install RostaRob 8 18,625 06-29-2019, 02:44 AM
Last Post: rindel
Star remote mirror co ax beezerman67 2 7,470 01-29-2018, 04:35 AM
Last Post: 1969_Mach1
  Just had rear window gasket installed on 69 mustang rindel 9 28,685 11-01-2015, 03:50 PM
Last Post: 1969_Mach1
  73 rear window seal jjorge 7 21,299 06-20-2014, 10:46 PM
Last Post: ohiomustang
  Rear Bumper Accents martyfras 0 6,777 02-23-2014, 09:11 AM
Last Post: martyfras
  9 inch rear axles & gears ylwhrse 2 11,515 06-26-2013, 04:00 PM
Last Post: ylwhrse

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238134
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150924
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1702
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3964
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9113
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 2003
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1467
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 640
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1970
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 157061
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1087
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 3004
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1501
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1482
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8728
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1720
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3410
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21297
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1686
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15088

>