Windshield Washer Setup
#1
Guys,

Am working on installing the windshield washer reservoir, pump, nozzles and tubing. However, I have no idea how all this goes on and was wondering if someone could post some pics of their setup. Would be immensely helpful.....Wink

BDK
Reply
#2
I have some pictures I took back in 2008 of my 73 Convertible while I was prepping for the body work. I ended up consulting some of these pictures myself to route the washer hoses back through the hood after the hood was reinstalled after the paint job. In the pictures the underside of the hood still has the black Ziebart rustproofing on it so it's hard to see the black washer hoses. Hopefully these will help, if not, let me know and I'll try to take some new shots of the specific areas for the washer hoses. I've owned my 73 since 1974 so I'm confident this is the proper routing of the hoses.

[Image: DSCF4335.jpg]

[Image: DSCF4336.jpg]

[Image: DSCF4338.jpg]


In the picture below, the washer hose goes into the hood with a grommet holding it in place, then back out another large oval hole closer to the windshield, then attaches to a splitter T. I'll try to take some close-up pictures:


[Image: DSCF4339.jpg]

[Image: DSCF4699.jpg]

In the picture below, the washer hose is attached to the wiring harness (this is the factory configuration)

[Image: DSCF4723.jpg]



Reply
#3
Thanks Rare Pony, good pics. I need to do mine and I sent the link to my friend, he needs to do his. I don't know if he will be able to see the pics if he isn't a member?
Reply
#4
Glad to be of help. Oz, Hopefully your friend will join the site; it's free!

Since this topic seems to be of interest I went out to the garage and took some new pictures that show better detail.

By the way, Now that the body is looking great, I hope to pull the engine this winter and detail the engine compartment. Not looking forward to removing the old Ziebart from the compartment, but it did preserve it and keep it from rusting.

[Image: DSCF3010.jpg]

[Image: DSCF3003.jpg]

[Image: DSCF3004.jpg]

[Image: DSCF3005.jpg]

[Image: DSCF3006.jpg]

[Image: DSCF3007.jpg]

[Image: DSCF3008.jpg]

[Image: DSCF3009.jpg]

[Image: DSCF3011.jpg]

[Image: DSCF3012.jpg]

[Image: DSCF3013.jpg]

[Image: DSCF3014.jpg]

[Image: DSCF3015.jpg]

[Image: DSCF3016.jpg]

[Image: DSCF3017.jpg]

[Image: DSCF3017.jpg]

[Image: DSCF3019.jpg]
Reply
#5
Magic BiggrinSSig_goodjobThumbup
Reply
#6
Mike,

These are awesome!, especially the second set with the hood in white. It appears the nozzles just have a screw that attaches to the underside of the hood. Will need to find the black clips that attach the hose to the hood between the washer nozzles, but this is perfect. Thanks for the help!!!!!!

BDK
Reply
#7
Mike,

Good job - way to help!
Reply
#8
(12-24-2011, 09:48 AM)Rare Pony Wrote: I have some pictures I took back in 2008 of my 73 Convertible while I was prepping for the body work. I ended up consulting some of these pictures myself to route the washer hoses back through the hood after the hood was reinstalled after the paint job. In the pictures the underside of the hood still has the black Ziebart rustproofing on it so it's hard to see the black washer hoses. Hopefully these will help, if not, let me know and I'll try to take some new shots of the specific areas for the washer hoses. I've owned my 73 since 1974 so I'm confident this is the proper routing of the hoses.

[Image: DSCF4335.jpg]

[Image: DSCF4336.jpg]

[Image: DSCF4338.jpg]


In the picture below, the washer hose goes into the hood with a grommet holding it in place, then back out another large oval hole closer to the windshield, then attaches to a splitter T. I'll try to take some close-up pictures:


[Image: DSCF4339.jpg]

[Image: DSCF4699.jpg]

In the picture below, the washer hose is attached to the wiring harness (this is the factory configuration)

[Image: DSCF4723.jpg]

Those are some great pictures.....but I still can't see the nozzles themselves and how they are attached to the hood/cowl.....especially the older model....I have a 73
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Engine setup RobSweden 20 24,561 04-27-2015, 12:18 AM
Last Post: JTS71 Mach1

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
Bitten
Last Post: JTS71 Mach1
Yesterday 04:17 AM
» Replies: 4
» Views: 132
Exhaust Manifolds
Last Post: JTS71 Mach1
Yesterday 04:06 AM
» Replies: 3
» Views: 102
"Jacobra"
Last Post: JTS71 Mach1
09-15-2020 10:24 AM
» Replies: 76
» Views: 70782
That new/old Jeep smell
Last Post: JTS71 Mach1
08-26-2020 01:21 PM
» Replies: 4
» Views: 728
Several Snickers
Last Post: JTS71 Mach1
08-23-2020 02:37 PM
» Replies: 0
» Views: 2161
1969 Mach 1 GT?
Last Post: JTS71 Mach1
08-22-2020 11:16 AM
» Replies: 23
» Views: 26543
I wish
Last Post: JTS71 Mach1
08-20-2020 12:06 PM
» Replies: 1
» Views: 624
Pulling the motor
Last Post: JTS71 Mach1
08-18-2020 11:44 AM
» Replies: 11
» Views: 3386
Need 03/04 timing cover
Last Post: DaneGietka
08-18-2020 05:24 AM
» Replies: 0
» Views: 520
69 Mach1 Schematic
Last Post: mikemcg
08-17-2020 06:41 PM
» Replies: 2
» Views: 745
Fuel pump & carb replacement
Last Post: Tom W
08-13-2020 07:42 AM
» Replies: 37
» Views: 4509
grille and lower grille color
Last Post: wvayn
08-03-2020 10:05 PM
» Replies: 5
» Views: 1404
Squirrels!
Last Post: Oztrailer
08-01-2020 06:11 PM
» Replies: 1
» Views: 2419
Windshield Washer Setup
Last Post: RobbyMach1
07-28-2020 02:43 AM
» Replies: 7
» Views: 14431
1969 Lilac
Last Post: bob.harlan
07-28-2020 01:35 AM
» Replies: 2
» Views: 1372
Mystery connector on A Pillar
Last Post: mikemcg
07-26-2020 06:46 AM
» Replies: 13
» Views: 3340
69 Mach I body shell
Last Post: JTS71 Mach1
07-25-2020 06:18 AM
» Replies: 7
» Views: 2089
Rear Axle Gears
Last Post: 1969_Mach1
07-21-2020 02:23 AM
» Replies: 2
» Views: 1544
69 Coupe
Last Post: ssjohns
07-20-2020 01:37 AM
» Replies: 0
» Views: 1327
1969 Mach1 Parking light socket with wir...
Last Post: rindel
07-15-2020 12:58 PM
» Replies: 2
» Views: 1688

>