Posts: 4
Threads: 3
Joined: Nov 2011
Hi guys im new to the game, so just trying to learn, was curious which motor this is
Posts: 532
Threads: 59
Joined: Dec 2010
It's a Cleveland. Not sure of the size ...351 ?
Posts: 3,119
Threads: 92
Joined: Jan 2010
Would just about have to be a 351 as it appears to be a 71-73 mustang engine bay. Judging by the look of things it appears original. And they never put the 400 into a Mustang darn it. JTS 71 Mach1
Posts: 4,181
Threads: 46
Joined: Jan 2011
351 Cleveland.
Here in the U.S. we only had the 351 as a Cleveland option. Steve O and his mates down under had the 302 Cleveland option as well in their Ford products.
In other vehicles here in the states after 1973 the 351/400M became the option and look similar to the Cleveland (different bell housing pattern and motor mount pattern).
Posts: 940
Threads: 80
Joined: Nov 2010
I agree with Steve the 351 clevland was only an option in cars.The 351m/400m was an option in trucks and cars till the 80s in trucks.the clevland was short lived as far as production went from 1970-1975.
Posts: 194
Threads: 6
Joined: Jan 2011
351 C ...fuel pump has the bolts ..one on top other directly below
I believe the 351 M and 400 had the same, but one was a stud instead of a bolt.
just for kicks, pop the distributor cap off and see if it has 2 sets of points in there.