Posts: 4,181
Threads: 46
Joined: Jan 2011
Hopefully MyMachOne will see the post and respond.
His Mach 1 is a 1969 and I believe that he runs a 351W and automatic. I would imagine it is either a FMX or a C-4.
Posts: 282
Threads: 50
Joined: Mar 2011
(09-11-2013, 06:17 AM)69cobrajetrugae2 Wrote: (09-25-2011, 10:47 AM)mymachone Wrote: I have been experiencing a vibration at 60+ mph around the transmisson , I thought it was a U-joint but to nite I checked the U-joints and they were ok, but I did find the front yoke going into transmisson was sloopy . I suspect the yoke is in need of replacement /
I am thinking thats the issue not the tranny output shaft.
Can anyone help conmfirm ?
Hi. What engine and transmission is in your car? I have te same problem but it varies with temperature which leads me to the mount. Mine is oily but intact. Please advise. Thanks..
I had the same problem , it was not the yoke , it was the shaft bushing , I also put a new tranny mount in , use the rubber only ones. The urethane ones are to hard and do not dampen the vibration.
I can now drive it upwards of 80+ mph and have very little vibration.