Posts: 45
Threads: 12
Joined: Aug 2011
Does anyone have the exact measurements for the chin spoiler on the 69 Mach 1. Thanks for any help in advance!
Shane
Posts: 5,003
Threads: 2,097
Joined: Aug 2009
Can anyone help Shane out?
Posts: 940
Threads: 80
Joined: Nov 2010
Ill do some research when I get home.If I can get access to the web.
Posts: 940
Threads: 80
Joined: Nov 2010
Posts: 45
Threads: 12
Joined: Aug 2011
Thanks guys, your awesome!
Posts: 5,003
Threads: 2,097
Joined: Aug 2009
So were the dimensions ever determined? I like to get the resolutions to these questions so it helps someone else down the line.
Posts: 940
Threads: 80
Joined: Nov 2010
Not really but I have 10 years of mustang books I can look through to see if it is in one of them. all I found was pics.
Posts: 350
Threads: 21
Joined: Jun 2011
Are you speaking of that plastic spoiler under the front bumper?
I mounted one on my 70 Mach but its aftermarket and not NOS.
Were you looking for an outside measurement, end to end and mounted onto the car or were you looking for a measurement on one that was not mounted yet as it would be slightly longer then because it had not been flexed yet?
Posts: 5,003
Threads: 2,097
Joined: Aug 2009
Good questions guys! Hopefully Shane will reply back! I try to stay on top of technical questions so people can get answers.
Posts: 45
Threads: 12
Joined: Aug 2011
Sorry for the late reply. What I found out was that basically the chin spoiler I have has three tabs on it, one in the center and two towards the outside. These tabs lined up perfectly with the factory lower valance bolts. So I bolted them up and looked it over from all angles and at several pics of other cars. After careful looks and consideration I used a small drill bit and self tapping screws and I think it turned out nice! I am going to attempt to post some pics of the car as promised earlier. I am still trying hard to get the car together.
Shane