2004 wheels on a 71 mach 1

[rivet71]

has anyone tried fitting 2004 mach 1 wheels on a 71 mach 1?
they are the modern / larger version of our beloved magnum 500s so would make a good track day wheel if they fit.
I'm looking for an cheap alloy wheel in a 17inch or larger for use on the track or drag day and have seen the eleneour type wheels available for around $ 2oo each.
Does anyone have any experience or recomend any cheap aftermarket wheels that will fit?
Any ideas would be great.
Rivet73

[Rare Pony]

I had an extra set of 04 Mach 1 wheels that I tried on my 73 Mustang Convertible with factory disc brakes. But the wheel barely touched the steering link. They would probably work with a spacer, but not sure. Here are a couple of pics I took (these were before I rebuilt the brakes). I went with the Ford Factory Aluminum Wheels that were offered on the 73 Mustangs:

[Steven Harris]

So the bolt pattern was the same?

[Rare Pony]

So the bolt pattern was the same?

Yes, same bolt pattern. In the first picture you can see the studs in the bolt holes.

[rivet71]

Thanks for the pics, that certainly explains it.
I agree with you - the 5 slotters look great on your convertible.
I have found a set of KMC wheels on line that should fit no problem so these should do the job ont track days.
Cheers
Rivet71

[VintageSpeed]

just to make sure, I've found a set of 16" 2006 mustang cobra style wheels.

I should be able to fit these on my 73 mach, with some spacers?

[Rare Pony]

Not sure, the stock 2003/04 Mach 1 wheels are 17 inch.