Posts: 940
Threads: 80
Joined: Nov 2010
(02-12-2011, 12:42 PM)JJS Wrote: Greetings fellow Mach1 owners! Jason here from Fort Wayne IN! I have a 73' mach 351c. I've never been on a forum in my life so I look forward to you folk showing me the ropes... Great car! These big ones are getting alot harder to find.
Jason
Welcome JASON. enjoy the site.You may want to start a thread of your own it will get more response.
Great looking car.Great rides seem to be down under would love to go and see them.Enjoy the site. Jim from Iowa.
Posts: 32
Threads: 7
Joined: Dec 2010
Hey Rivet 71, welcome to the site! If you need help sourcing parts let me know and if I need a part for my Falcon XB coupe I'll return the favour for sure! Sound ok mate?
Posts: 4,181
Threads: 46
Joined: Jan 2011
Rivet 71,
Welcome. Thanks for the pictures. Thankful that your car arrived without damage. Keep us posted.
Posts: 23
Threads: 7
Joined: Feb 2011
(02-21-2011, 04:23 AM)madmach Wrote: Hey Rivet 71, welcome to the site! If you need help sourcing parts let me know and if I need a part for my Falcon XB coupe I'll return the favour for sure! Sound ok mate?
The XB Coupe is a nice OZZI ride but it stole all it's que's from the 71 mach one- but you already know that. Heaps of part for your XB in OZ, just let me know.
Rivet 71
Posts: 32
Threads: 7
Joined: Dec 2010
My driprails are dented up bad so if you're out at a swap meet and see a good set of driprails for a coupe I could sure use a pair. Apparently they're a tough item to find.
Thanks!
Posts: 23
Threads: 7
Joined: Feb 2011
i'll keep you in mind if i see any XB coupe parts.