Lower blackout
#1
Can someone tell me if the correct lower blackout paint for a
71 Mach 1 is textered or flat and what gloss it is.
Thanks
Bill
Reply
#2
check uot this post in our forum.
RE: 1972 original paint questions
I think at the end it has the paint code you are looking for at the bottom.And it should be matte from my research.
hope this helps.
Welcome2
Reply
#3
Check out this post too! Good luck.

http://mach1club.com/showthread.php?tid=...cor+option
Reply
#4
This is what I used to make my 72 concourse correct . Hope it helps
New Paint Methods for getting the correct Hood, Engine Compartment and lower blackout
Mustang Expert and owner of Mustang Central, Allan Shepley, has generously provided the 429 Megasite with the below information on achieving the correct appearance for our 71 Mustang hoods, lower blackout and underhood black using currently available products. Prior to Allan's help, people had to come up with something themselves since the old DDL-9423 is either unavailable (or very hard to find). Thanks Allan!!

John Blair ~ 429 Megasite Webmaster





I build Mustangs for a living and struggled for a long time to find the best paint for hoods and engine compartments as well as the lower black out area. The biggest problem you have with semi-gloss black with new paints, not lacquer, is getting an even finish. Most of them look splotchy or too flat or too glossy. The problem with most is you add a flattener to your clear, but the results are very inconsistent. I finally found PPG's DCU 2060 it is a premixed clear that already has the perfect mix. All you add is the hardener DCX61 and reducer DT 885. The ratio is 6 parts DCU 2060, 1 part DCX61, and 1 Part DT885. You use your black paint of choice IE. Dupont, PPG, R&M, whatever you like and topcoat with the PPG DCU 2060. Apply two wet coats and when its fully dried you have the perfect finish. Not only does it look good but it also is very stain resistant, you can wax it if you like it will not make it look powdery. Its great in the engine compartment for a fantastic look and a tough durable and easy to clean surface. I better quit I'm sounding like a commercial.

Allan
Mustang Central

Jam
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238041
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150594
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1682
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3953
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9108
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 1993
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1465
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 640
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1964
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 157002
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1086
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 2992
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1498
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1471
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8682
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1719
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3403
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21116
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1681
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15078

>