1971 - 1973 Mach 1, what material is the "front bumper" made of?
#1
That front bumper cover is not rubber, although it is "rubbery" and people mistakenly call them "rubber bumpers." Your bumper cover is reaction injection molded Polyurethane plastic - or PU for short (sometimes PUR for polyurethane resin - PU and PUR are two different names for the same plastic).

Polyurethane plastic is very adhesive so you won't have any trouble repainting it. (Go to a hardware store and you will find polyurethane glue - two part resin glue is basically the same stuff - that's how adhesive it is.) You don't need to remove the existing paint, just sand it smooth then paint over. It will probably take you 45 minutes with 320 grit sandpaper. Primer paint any places where you cut through the paint to the raw plastic. Make sure that you add a flex additive to the paint (and use a flexible primer too) because the plastic bumper cover is flexible and without the flex additive the new paint will crack. DO NOT put adhesion promoter on the part it will destabilize the bond between the existing paint and the plastic and a month later your new paint job will be flaking off. Adhesion promoter is only used on the newer style (since around 1995 and newer) TPO plastic bumpers (and PP and modified-PP and TPE just to be technically correct). Adhesion promoter is used on the raw TPO (et. al.) plastic as a bonding agent to help the primer paint adhere to the raw plastic because the adhesiveness of the TPO plastic is low compared to PU.
Reply
#2
You also have steel inside the front bumper on all 3 years . I just want to know why some one hasn,t mayed some new moulds for these parts . The 73 has alot of weight . But they did work if you hit something . The paint that was used wasn,t a body paint or it wouldn,t have bonded to the surface . C . L .
Reply
#3
Good info. I know the body shop that did mine on my 73 convertible had a hard time with the front bumper. They had to redo it three times. The finally had the PPG rep come in and help them out!
Reply
#4
Good information indeed! I need to get some of that polyurethane glue for my truck. A tire tread took off the bottom part of my dually fender and a ditch took off part of my running board. I imagine that glue will work for both repairs.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Home Made Heim Joint Struts Jimjific22 10 18,665 03-20-2018, 11:09 AM
Last Post: Mustangmike
  Home Made Spoiler JTS71 Mach1 7 17,754 12-07-2016, 01:24 PM
Last Post: Steven Harris
  Set the Alignment on 1967-1973 Ford Mustangs Mach 1 Club 4 16,907 03-10-2016, 11:05 AM
Last Post: JTS71 Mach1
  Front suspension coil removal DIY Masol 2 10,212 08-25-2015, 08:45 AM
Last Post: Masol
  Repair 1973 Emergency Brakes 6foot4 4 14,787 03-26-2015, 10:29 AM
Last Post: Steven Harris
  How to install a aftermarket throttle body on the 03/04 Mach 1 Victor.Gorea 0 10,156 08-26-2013, 12:47 AM
Last Post: Victor.Gorea
  Do It Your Self Door Panels 69 Mach 1 mymachone 2 11,123 07-28-2011, 06:05 AM
Last Post: Mach 1 Club
  The Tach Cluster - 1971-1973 Mustang Mach 1 Club 10 62,238 05-22-2011, 11:34 AM
Last Post: turtle5353
  Rebuilding a 351 Cleveland, for use in a 1971 Mach I Mustang Mach 1 Club 0 8,952 02-15-2010, 07:43 AM
Last Post: Mach 1 Club

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238141
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150925
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1703
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3964
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9113
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 2003
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1467
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 640
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1971
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 157068
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1087
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 3005
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1501
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1482
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8728
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1720
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3410
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21299
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1686
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15088

>