Posts: 98
Threads: 16
Joined: Jul 2010
I Would Like to Say Hello Fellow Mach 1 Owners
I recently bought a 70 Mach 1 that is in need of some serious attention!
I have a lot of questions and am hoping some of you can help answers them. I will post as often as I can and keep anybody that is interested in my restoration up to date. The avatar I used is what I am aiming for in this resto.
Posts: 5,003
Threads: 2,097
Joined: Aug 2009
Welcome Robertb40 glad you found us! Although you have some work ahead of you, your going to have one sweet ass car when its done! Do you plan on adding the shaker hood scoop to it again?
Please keep us up to date with the resto as that is what this site is about, we want to have an archive of everything Mach 1 related so your progress will be very important to people for a long time to come!
Again welcome to the site!
Posts: 984
Threads: 104
Joined: Nov 2009
Welcome to the site
Looks like you have alot of work ahead of you, but in the end you will have a beautiful car. Hopefully you keep us up-todate on your restoration.
Posts: 54
Threads: 11
Joined: Jun 2010
yep!! lot of work and lot of fun too..! it will be beautiful mach 1 for sure!!
I wish you all the best
patrick
Posts: 3,222
Threads: 197
Joined: Nov 2009
Welcome to the Club! Looks like you have a decent car to start with. I've seen a lot worse. Take lots of pics as you take it apart as they will come in handy when you start putting it back together. Good luck and have fun!
Posts: 98
Threads: 16
Joined: Jul 2010
I have a link you all can keep up-to-date with the restoration of my Mach 1. This is where I post all my photos:
http://www.flickr.com/photos/47772706@N06/sets just follow the this link to see all the problem areas of this car as well as the repairs. Some work has already been done but theres still alot to do.
Posts: 47
Threads: 3
Joined: Jun 2010
Good project keep us Intouch as you go and Welcome to the Mach1 club.
Posts: 37
Threads: 7
Joined: May 2010
Another Mach spared from the scrappers. Good job, and welcome.
Posts: 62
Threads: 25
Joined: May 2010
(07-13-2010, 11:21 AM)twotime Wrote: Another Mach spared from the scrappers. Good job, and welcome.
Holy Crap...that's gonna be a lot of work,
Robertb40!
Welcome to the site...we're gonna need to see a ton of pics...so just keep us all updated!
Shit, I don't even do my own oil changes
Larry
Posts: 98
Threads: 16
Joined: Jul 2010
Hey Guys!!!
I Finally got the time to order almost all of the sheet metal I need to get this project off the ground. I have 2 weeks of vacation time coming at the end of Aug. and I plan on using all of it working on the Mach!!! I will post more photos as I get the work done.