Martin Jetpack flight demonstration
#1
The technology

The Jetpack is constructed from carbon fiber composite, has a dry weight of 250 lbs (excluding safety equipment) and measures 5 ft high x 5.5 ft wide x 5 ft long. It's driven by a 2.0 L V4 2 stroke engine rated at 200 hp (150 kw), can reach 8000 ft (estimated) and each of the two 1.7 ft wide rotors is made from carbon / Kevlar composite.

There is always risk associated with flying so Martin Aircraft has been careful to equip the pack with redundant systems that will take over in the event that the main system goes down. If a crash-landing is required, a pilot-operated toggle will rapidly fire a small amount of propellant deploying a ballistic parachute (similar to a car airbag) which will allow the pilot and jetpack to descend together. It also has an impact-absorbing carriage, patented fan jet technology and 1000 hours engine TBO (Time Between Overhaul). Small vertical take-off and landing aircraft (VTOL) are not subject to the same limitations as other helicopters and fixed wing aircrafts but Martin Aircraft have built it to comply with ultralight regulations and therefore suggest it as at least as safe to operate, and claim it is the safest of all jetpacks yet built.

The Jetpack achieves with 30 minutes of flight time and is fueled by regular premium gasoline, though you will undoubtedly earn some disbelieving stares at the petrol station. Since it has been built according to ultralight regulations no FAA recognized pilot's license is required to fly one in the U.S., though this will depend on a country's specific requirements. However, despite being significantly less complex than a helicopter to fly as pitch and roll are controlled by one hand, thrust and yaw by the other, Martin Aircraft won't let anyone take receipt of their jetpack before completing their specially-developed Martin Aircraft Company approved training program. The pilot must also weigh between 140-240 lbs.

Tell what I really want to know: how can I get my hands on one?

After nine prototypes Martin Aircraft have an accurate expectation for how much a jetpack will cost, and suggest that at $86,000 it is pitched at the level of a high-end car. As sales and production volume increase they expect this to drop to the price of a mid-range car. A 10% deposit buys you a production slot for 12 months hence; progress payments are made during manufacture with final payment due on delivery. Details and a deposit contract are available from their Martin Aircraft's website.

And when will I be able drive it to work?

Again it's a waiting game as currently air traffic control technology is not yet advanced enough to cope with jetpacks, but the US Federal Aviation Administration (FAA) is developing "highways in the sky" technology - 3D highways based on GPS tracks. Initial tests have been positive but the technology is unlikely to be implemented for another 10 years yet so for the meantime initial use will remain recreational as with jet-skis, snowmobiles and ultralights. Until then we'll keep waiting and watching the sky...

http://www.youtube.com/watch?v=kLccl_NWDQE

Cost?
Martin Aircraft has built several prototypes so we have a good idea how much they cost to manufacture. Depending on production volume, the initial cost will be about the same as a high-end motorcycle or car. As volume increases this will drop to be similar to a mid-range motorcycle or car.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  $2.8 million Aston Martin One-77 Mach 1 Club 0 7,313 05-18-2011, 08:33 AM
Last Post: Mach 1 Club
  Mel Martin's Private Auto Museum Mach 1 Club 4 14,847 05-08-2011, 09:23 AM
Last Post: Rare Pony
  $1.87M Aston Martin One-77 almost sold out! Mach 1 Club 0 6,984 12-09-2010, 11:27 AM
Last Post: Mach 1 Club
  The Aston Martin One-77. Mach 1 Club 1 9,248 11-03-2010, 06:14 AM
Last Post: bluoval

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238166
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150943
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1713
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3975
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9116
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 2005
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1469
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 642
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1972
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 157103
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1088
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 3013
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1503
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1482
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8732
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1723
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3431
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21309
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1686
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15093

>