69 Mach1 Schematic

[Mach1 Driver]

Wire diagrams have always bugged me. They are fine for their intended purpose of wiring a car, but most people never do that. I find it difficult to figure out how something really works from the darn things. I’m a retired electrical engineer, and in my job I rarely looked at wire diagrams- I always went to the document we developed first, and what we made the wire diagram from- a schematic. Schematics show just the bare essentials- no wire numbers, no colors, no plugs or connectors, and they only show the circuit you want to look at – not everything at once. They simplify the circuit so you can SEE how it works at a glance.

I heard one individual say that these cars are too simple and a schematic isn’t needed. That may be true for most of the car, but I’ll wager that there are few among you who can tell me how the windshield wipers stop (park) so quickly. There is some nifty science involved in that little piece of work. And if it’s true that they are simple, then why are there so many questions about turn signals? And how about the ignition circuit? These circuits are basically the same all the way from 64.5 to 70.

So….what I did was take a wire diagram for my 69 and I backward engineered it into a group of schematics for every system on the car. It’s five pages, and much of it applies to all the classics, since they are all pretty much the same. Enjoy, and don’t ask me to add colors and plugs and stuff – go get a wire diagram for that. By the way, Ford didn’t publish schematics; this is the only one available for our classics.
Well I see that this site didn't accept my upload of pdfs, so I'll resort to BB code. This doesn't work for everyone, but hopefully it will for most- I can see five pages of schematics below using my desktop running Win7: