08-18-2019, 11:04 PM
Here I go again, after getting the "won't go" problem resolved, ran into another. I also converted the rear brakes to disc and having issues with them. Brakes are real soft, have to pump them up 3-4 times to get them to work. Had it up to 5 or six but after adjusting the calipers with spacers for alignment, it got a little better, but there is too much space between the rotor and pads. We also adjusted the piston out some which helped but still have to pump up them up. Not real sure what to do. We did power bleed the brakes also. Have a new master cylinder with a proportioning unit on it.