EFI Problem - Solved
#1
OK - Sorry this was not on a Mustang but the diagnostic technique and solution will apply across the board.
Problem: Very rough running with no meaningful fault codes available from the ECU. Engine running lean then rich; lean then rich and some times over fueling to the point of stalling.
Diagnostic Procedures: 1) Check fuel delivery - Pump working and filter not blocked. 2) Check fuel rail pressure / pressure relief valve with vacuum pipe on and off. Within limits.
If both of those are good you are about half way there. I admit I was lucky to be able to check what the air and coolant temperature sensors were reading (the same to within 1*C) on the cold engine.
The next 'Best Guess' (OK my mentor knows his stuff) was the ECU unable to 'find' the correct injector width pulse for even running. It was running lean for some seconds and then dump in fuel which sent the mix fully rich and then back to lean - all the time the engine missing and shaking. Restricting the return line (raising the rail pressure) made the engine run better.
He surmised the ECU could not receive a signal it could use to stablise the mixture, so it was decided to disconnect the the O2 senders. This makes the ECU revert to its inbuilt, factory set 'best guess'. The engine ran very much better (would have got you home easily).
As the engine ran pretty well with no O2 sensor input it was decided to replace them with new. Result? Total transformation - back to its old self.
I actually used BOSCH Premium units (Pelican Parts have them). I have been told (now have proof) that O2 senders have a life of about 50-60k miles and can then become 'unreliable'.
Hope this helps someone out there.
Reply


Messages In This Thread
EFI Problem - Solved - by Mach1FatherFigure - 03-31-2016, 11:25 AM
RE: EFI Problem - Solved - by JTS71 Mach1 - 03-31-2016, 01:19 PM
RE: EFI Problem - Solved - by Mustangmike - 03-31-2016, 09:09 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238159
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150938
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1709
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3972
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9116
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 2004
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1469
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 642
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1972
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 157093
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1088
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 3011
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1501
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1482
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8731
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1723
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3411
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21305
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1686
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15092

>