07-28-2020, 02:43 AM
(12-24-2011, 09:48 AM)Rare Pony Wrote: I have some pictures I took back in 2008 of my 73 Convertible while I was prepping for the body work. I ended up consulting some of these pictures myself to route the washer hoses back through the hood after the hood was reinstalled after the paint job. In the pictures the underside of the hood still has the black Ziebart rustproofing on it so it's hard to see the black washer hoses. Hopefully these will help, if not, let me know and I'll try to take some new shots of the specific areas for the washer hoses. I've owned my 73 since 1974 so I'm confident this is the proper routing of the hoses.
In the picture below, the washer hose goes into the hood with a grommet holding it in place, then back out another large oval hole closer to the windshield, then attaches to a splitter T. I'll try to take some close-up pictures:
In the picture below, the washer hose is attached to the wiring harness (this is the factory configuration)
Those are some great pictures.....but I still can't see the nozzles themselves and how they are attached to the hood/cowl.....especially the older model....I have a 73