Turn signals not working bad ground?
#1
Purchased my 73 Mach 1 in June.  The turn signals worked but now they don't.  I have replaced the flasher and the turn signal switch.  All fuses look good.  I do not hear any clicking in the flasher unit when the turn signals are used.  All lights are working including the hazard flashers. Any thoughts?  Appreciate any assistance. 

I was reading another forum on here and he fixed the problem by cleaning up the ground wires. He didn't state which ones or the locations sadly. I've already cleaned the bulb's grounds front and back and those aren't the problem because the lights still light up with the hazards. I'm pretty sure the ground is located somewhere in the dash that fixed the problem with the other guy's turn signals. Can anyone point me in the right direction?

Link to the other guy's forum: https://mach1club.com/showthread.php?tid...g#pid41288

Thanks,
Justin
Reply
#2
The grounds are all over the place. Anywhere you see a black wire attached to a stud or body/sheetmetal directly, that's a ground. If memory servers me right the first one 1. at the battery and solenoid area, should be a 3/8 headed screw straight into the inner fender panel, and goes straight to the negative battery post. 2. There is one at the back of the engine usually a braided cable to the firewall it's self. 3. I believe there is one at the bottom of the steering column which attaches to firewall. 4. there a couple grounds at the rear tail lights along the bottom edge of the taillight panel itself. 5. there is a ground stud up behind the heater box if I remember correctly. I know there are more but those are the ones that come to mind. Hope it helps.

JTS


PS I posted this in both threads so you won't miss it. Good Luck
Reply
#3
(03-03-2022, 08:17 AM)JTS71 Mach1 Wrote: The grounds are all over the place. Anywhere you see a black wire attached to a stud or body/sheetmetal directly, that's a ground. If memory servers me right the first one 1. at the battery and solenoid area, should be a 3/8 headed screw straight into the inner fender panel, and goes straight to the negative battery post. 2. There is one at the back of the engine usually a braided cable to the firewall it's self. 3. I believe there is one at the bottom of the steering column which attaches to firewall. 4. there a couple grounds at the rear tail lights along the bottom edge of the taillight panel itself. 5. there is a ground stud up behind the heater box if I remember correctly. I know there are more but those are the ones that come to mind. Hope it helps.

JTS


PS I posted this in both threads so you won't miss it. Good Luck

Sounds good, I'll update you after I locate and clean the ground wires up! Thank you for all your help.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Turn signal switch 1969jimmach 1 10,156 07-28-2011, 10:57 AM
Last Post: norcal510

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238042
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150595
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1682
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3953
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9108
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 1993
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1465
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 640
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1964
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 157007
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1086
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 2992
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1498
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1471
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8682
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1719
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3403
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21117
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1681
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15078

>