07-27-2021, 07:49 AM
(07-27-2021, 06:11 AM)That\s very interesting and sounds like something that I can actually do myself lolThank youJTS71 Mach1 Wrote: One last thought is aligning the shifter, and shift rods. If it's not going to full neutral everytime you come out of reverse, it will lock it out of all forward gears. There should be a hole in the side of the shifter, I believe it should be 5/16. Take a 5/16 drill bit, and see if you can insert the smooth end into the hole, and through the shifter arms. If it goes in smoothly then the shifter arms are aligned. If not you will have to adjust the shift rods until you can insert it smoothly. Hope it helps.
JTS
![[-]](https://mach1club.com/images/collapse.png "[-]")
