racing mirror adjustment
#1
How do you tighten the cables on exterior mirrors to keep them in adjustment without trying to change cables or mirrors
Reply
#2
Those cable for the remote mirrors. Work on a push pull system, all 3 are supposed to be tight / snug, and as you move the bat handle one cable pulls the Mirror one direction the opposing cable or cables, then move the opposite direction There shouldn't be any real looseness in the cables, and I don't remember any adjustment, so to speak. Seems to me there was a small set screw to hold the cables in place, but not for adjustment???  Take it out of the car, and soak the entire cables in a pan of ATF. That will creep into the cables, and loosen them up, and may cure your problem. If not, sounds like you need to find new cables. Hope it helps.

JTS
Reply
#3
(05-05-2021, 10:52 AM)JTS71 Mach1 Wrote: Those cable for the remote mirrors. Work on a push pull system, all 3 are supposed to be tight / snug, and as you move the bat handle one cable pulls the Mirror one direction the opposing cable or cables, then move the opposite direction There shouldn't be any real looseness in the cables, and I don't remember any adjustment, so to speak. Seems to me there was a small set screw to hold the cables in place, but not for adjustment???  Take it out of the car, and soak the entire cables in a pan of ATF. That will creep into the cables, and loosen them up, and may cure your problem. If not, sounds like you need to find new cables. Hope it helps.

JTS
Thanks for your input. This for the mirrors on a 69/70 Mach 1. I don't see any set screws. I am not trying to loosen them up, but to keep them from moving the mirror itself after you set it. I am talking about the cables inside the  casing that the cables move in. Ialso have a ranchero with the  same problem.
Reply
#4
These were mediocre at best when new. I've seen stuff jammed in around the glass to keep them from moving, so rest assured you're not the only one who has had trouble with them. You may never be able to solve this issue. Sorry I wish I knew more. 

JTS
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
What's One More Iron In The Fire!
Last Post: fram lee666
03-18-2024 06:21 PM
» Replies: 125
» Views: 238031
"Jacobra"
Last Post: JTS71 Mach1
06-30-2023 11:13 PM
» Replies: 86
» Views: 150590
My old Queensland Ambulance
Last Post: JTS71 Mach1
06-30-2023 11:08 PM
» Replies: 5
» Views: 1677
New member from San Jose, CA
Last Post: JTS71 Mach1
05-09-2023 08:39 AM
» Replies: 12
» Views: 3953
Saving Seatbelts
Last Post: Jim
02-19-2023 10:23 PM
» Replies: 2
» Views: 9108
Sourcing new wheels
Last Post: JTS71 Mach1
01-25-2023 02:34 PM
» Replies: 1
» Views: 1992
Shaker Air Filter
Last Post: JTS71 Mach1
01-08-2023 02:24 AM
» Replies: 3
» Views: 1464
1971 Mach 1 parting out interior parts -...
Last Post: ylwhrse
12-22-2022 01:38 PM
» Replies: 0
» Views: 640
Painting
Last Post: Rare Pony
12-14-2022 06:24 PM
» Replies: 2
» Views: 1964
WELCOME ALL NEW MEMBERS INTRODUCE YOURSE...
Last Post: JTS71 Mach1
08-31-2022 01:36 PM
» Replies: 82
» Views: 156972
1970 mach 1 matching numbers
Last Post: Kstweeter
08-31-2022 10:31 AM
» Replies: 1
» Views: 1086
Brake booster/servo hose length
Last Post: JTS71 Mach1
08-23-2022 09:40 AM
» Replies: 7
» Views: 2990
New Member
Last Post: JTS71 Mach1
08-20-2022 11:18 AM
» Replies: 2
» Views: 1497
smooth window operation on 70 Mach
Last Post: CUSTOMMISER
08-15-2022 12:10 PM
» Replies: 2
» Views: 1468
Blinkers on solid
Last Post: busted21
08-09-2022 03:58 AM
» Replies: 14
» Views: 8681
Blinkers on solid when lights on.
Last Post: JTS71 Mach1
08-08-2022 12:06 PM
» Replies: 1
» Views: 1718
351 cj running hot
Last Post: busted21
08-08-2022 12:13 AM
» Replies: 5
» Views: 3403
Major Winter projects
Last Post: JTS71 Mach1
07-09-2022 05:12 AM
» Replies: 49
» Views: 21064
Happy Fathers Day!!!
Last Post: JTS71 Mach1
06-20-2022 02:34 AM
» Replies: 0
» Views: 1681
1969 Raven Black 390 Looking For
Last Post: mason1958
06-11-2022 09:48 AM
» Replies: 10
» Views: 15074

>