Washer Hose Routing - Printable Version +- Mach 1 Club (https://mach1club.com) +-- Forum: Mustang Mach 1 Forums (https://mach1club.com/forumdisplay.php?fid=5) +--- Forum: 1971-1972-1973 MUSTANG MACH 1 FORUMS (https://mach1club.com/forumdisplay.php?fid=8) +---- Forum: General Discussion (https://mach1club.com/forumdisplay.php?fid=38) +---- Thread: Washer Hose Routing (/showthread.php?tid=8783) |
Washer Hose Routing - 73mockone - 03-14-2022 I am replacing the washer hose on my 1971 BOSS 351 and need some help with the routing. When exiting the washer fluid reservoir, and following the wiring harness toward the back of the hood, is the washer hose wrapped within the wiring harness, or does it run along the harness outside of the wiring tape? Any help would be appreciated. Thanks. RE: Washer Hose Routing - JTS71 Mach1 - 03-14-2022 On my "71 Mach1" it was not inside the harness. It was run through the plastic loops, that held up the harness. But it was not inside with the wires. Hope it helps. JTS RE: Washer Hose Routing - 73mockone - 03-14-2022 (03-14-2022, 09:48 AM)JTS71 Mach1 Wrote: On my "71 Mach1" it was not inside the harness. It was run through the plastic loops, that held up the harness. But it was not inside with the wires. Hope it helps. Thank you! RE: Washer Hose Routing - Oztrailer - 03-14-2022 Here is a good thread that might help https://mach1club.com/showthread.php?tid=4108 RE: Washer Hose Routing - JTS71 Mach1 - 03-15-2022 Yep that makes it even better, when you got pics! JTS |