Dome light wiring - Printable Version +- Mach 1 Club (https://mach1club.com) +-- Forum: Mustang Mach 1 Forums (https://mach1club.com/forumdisplay.php?fid=5) +--- Forum: 1971-1972-1973 MUSTANG MACH 1 FORUMS (https://mach1club.com/forumdisplay.php?fid=8) +---- Forum: Electrical (https://mach1club.com/forumdisplay.php?fid=42) +---- Thread: Dome light wiring (/showthread.php?tid=8100) |
Dome light wiring - JackWagon3 - 10-19-2021 So my dad had a new headliner put in before he passed and the car became mine. They did a fantastic job on the headliner and installed a new dome light. Looks awesome. But…some brainiac never ran the wire to the new dome light. So…I need to run one. I’d like to only peel back as little as I need and fish a wire to the light. My question is, where does this wire get fed from? Drivers side A pillar I assume? RE: Dome light wiring - JTS71 Mach1 - 10-19-2021 That seems right as I remember there are little clips that hold it to the A pillar under the trim piece, then it goes back to the roof bow nearest the dome light with more clips, then to the light. I think that's right. If not someone will come along and set me straight. LOL! JTS |