Mach 1 Club
Just joined - Printable Version

+- Mach 1 Club (https://mach1club.com)
+-- Forum: Mach 1 Club Member Area (https://mach1club.com/forumdisplay.php?fid=1)
+--- Forum: WELCOME ALL NEW MEMBERS INTRODUCE YOURSELF HERE ! (https://mach1club.com/forumdisplay.php?fid=2)
+--- Thread: Just joined (/showthread.php?tid=7064)



Just joined - Terry C - 07-11-2020

Hi there - just joined the forum.  Bought a '69 Mach 1 428 SCJ in Jan.  C6 with 4:30 rear in 
Indian Fire Red over Black int.   Glad to be on board and looking to learn and share.


RE: Just joined - 1969_Mach1 - 07-11-2020

That's a nice and rare car.  Enjoy it.  Rear axle gears are a extremely steep, so stay off the highways.


RE: Just joined - JTS71 Mach1 - 07-11-2020

That Indian Fire Red is a beautiful color. My dad had a 65 Fastback painted almost identically to your Mach1, the only difference was the roof, and deck lid were also Matte Black, not just the hood. Was a very pretty car. Yours is Gorgeous! Was it fully restored when you bought it? Good Luck with it, and enjoy the site, lots of good people, and lots of info. 

JTS


RE: Just joined - bob.harlan - 07-12-2020

Welcome to the club, nice 69.


RE: Just joined - Smileys35 - 07-12-2020

Nice car Terry. I was turning about 4200 rpms on the highway in mine at 65 mph. I have 3:91 gears. I put the gear vendors in to preserve stock pieces and ordered a new drive shaft from Strange Engineering. Now I can cruise 70-80 mph at 3400 rpms. Really saves the wear and tear on the engine and is all bolt on. Run a few wires under console, can’t even tell.


RE: Just joined - Smileys35 - 07-12-2020

Gear vendor pics[attachment=13116][attachment=13117]