Mach 1 Club

Awhile back I posted about drive line vibration on the car , there were several suggesstions and ideas. Tryed them all and nothing changed.
Well , I was reading an article about Polyurethane bushings and mounts , basicly the did some reaserch and found these units are the cause of some issues in cars . and one of them was drive line vibrations !
They said the Polyurethane mounts ( transmission in my case do not absorb vibration as they are to dense , they found that the rubber one do a much better job . So I went and replaced my Polyurethane mount with the factory rubber mount and the vibration went away.
I should have picked up on this, as I didn't have vibrations at the drive line before I installed the Poly unit. I also did several other things besides and never made the connection.

So , that is something to consider next time we experienec vibrations in a car.

You finally found the culprit! Good for you, sometimes you just have to outlive the problem. Way to go . JTS 71 Mach1

(08-05-2012, 01:33 AM)JTS71 Mach1 Wrote: [ -> ]You finally found the culprit! Good for you, sometimes you just have to outlive the problem. Way to go . JTS 71 Mach1

Well it was either find the problem or not drive the car . as it is the tail shaft bushing and seal had to be replaced from the vibration.

Great detective work. Sometimes the old school parts are better.