Mach 1 Club

Full Version: Mach 1 Stock Suspension
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hey do Mach 1s have a lower stock suspension than the GTs of the same year? I only ask because as far as I know, the suspension on my mach is stock and I haven't lowered it yet. But I was looking at some pictures and while it does seem higher than my older car that was indeed lowered, the mach doesn't look like it sits quite as high as some of the New Edge GTs I've seen that have like a 4" gap between wheel and fender...
Or perhaps it's a weight difference with the engines making the mach sink lower?

Here's a side profile of my car to show you what I mean...
[Image: SideSmaller3.jpg]

It only looks to have maybe a couple inches of gap on those front wheels as opposed to a GT like this one where the gap is noticeably larger for the front wheels...
[Image: Capture.jpg]
The 03/04 Machs are a 1/2 inch lower than the GT's. My sons 01 Bullitt is 3/4 inch lower. If I have passengers in the Mach I have to be real careful over speed bumps.
(08-12-2011, 01:10 AM)Rare Pony Wrote: [ -> ]The 03/04 Machs are a 1/2 inch lower than the GT's. My sons 01 Bullitt is 3/4 inch lower. If I have passengers in the Mach I have to be real careful over speed bumps.

Thanks, Rare! Good to know!

Was worried I was gonna buy a grand worth of lowering stuff just to find out it was lowered already by the previous owner.