Fuse Panel on my ‘69
#1
Just bought a ‘69 and have a few electrical issues.  I checked out the fuses and found them all good except for the short stubby 4A that controls instrument lamps, clock, etc.  I don’t have power on either end of this fuse so it is not simply a bad fuse.  Anyone run into a similar problem and, if so, what was your solution.  Could this problem just be a bad fuse panel?
Thanks
Reply
#2
One possibility is dirty contacts in the light switch. The instrument lamps are controlled by a rheostat that maybe dirty. Try rotating the switch knob back and forth several times. That worked on mine.
Reply
#3
(02-06-2019, 06:18 AM)bob.harlan Wrote: One possibility is dirty contacts in the light switch. The instrument lamps are controlled by a rheostat that maybe dirty. Try rotating the switch knob back and forth several times. That worked on mine.

Tried that but did not work for me.  Tomorrow I will make up a jumper wire with an in-line fuse and see what I can figure out.

Thanks for the suggestion!
Reply
#4
Just to confirm, you did have the ignition key in the run position while you were checking the fuses?
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  1969 blower motor keeps blowing fuse rindel 8 12,163 01-05-2015, 12:08 AM
Last Post: rindel

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
Hard Exhaust Seats on a 390
Last Post: Mustangmike
12-10-2019 10:11 AM
» Replies: 5
» Views: 497
Do I have the wrong spoiler?
Last Post: Oztrailer
12-09-2019 07:16 PM
» Replies: 7
» Views: 461
Happy Thanksgiving!
Last Post: Mustangmike
11-29-2019 11:41 PM
» Replies: 2
» Views: 417
Been Awhile... '71 Rustang
Last Post: Mister 4x4
11-24-2019 11:06 AM
» Replies: 167
» Views: 167885
Certificate Issues
Last Post: Mister 4x4
11-24-2019 09:05 AM
» Replies: 5
» Views: 884
Cylinder lube for a long time stored mot...
Last Post: Steven Harris
11-22-2019 06:44 AM
» Replies: 7
» Views: 1636
1970 mustang mirror chrome bezel nut
Last Post: Raytags
11-14-2019 06:02 AM
» Replies: 0
» Views: 610
Cam Specs
Last Post: 1969_Mach1
11-12-2019 09:23 AM
» Replies: 1
» Views: 938
Great color combo!
Last Post: JTS71 Mach1
11-10-2019 10:49 AM
» Replies: 4
» Views: 4641
Brazing/Soldering a Brass Radiator
Last Post: 1969_Mach1
11-09-2019 03:15 AM
» Replies: 4
» Views: 757
428 CJ Commemorative coins
Last Post: Steven Harris
11-08-2019 03:29 PM
» Replies: 3
» Views: 505
transmission identification
Last Post: JTS71 Mach1
11-04-2019 09:20 AM
» Replies: 4
» Views: 5535
Kit Sullivan - RIP
Last Post: JTS71 Mach1
10-31-2019 07:37 AM
» Replies: 2
» Views: 676
Manual Trans Gear Oil
Last Post: 1969_Mach1
10-29-2019 07:18 AM
» Replies: 14
» Views: 7624
Perspective
Last Post: Steven Harris
10-22-2019 02:15 PM
» Replies: 3
» Views: 1095
The Donkey
Last Post: JTS71 Mach1
10-21-2019 02:56 AM
» Replies: 0
» Views: 458
Presentation
Last Post: JTS71 Mach1
10-20-2019 08:59 AM
» Replies: 9
» Views: 1683
"Jacobra"
Last Post: Steven Harris
10-19-2019 12:48 PM
» Replies: 74
» Views: 49441
Seeing the finish line.
Last Post: Steven Harris
10-19-2019 12:38 PM
» Replies: 9
» Views: 1388
1971 Mach-1 - Sell or finish?
Last Post: CCinPA
10-19-2019 01:32 AM
» Replies: 31
» Views: 4863

>