1971 windshield install
#1
Hello everyone. I replaced my windshield with a new one that I paid only $55 bucks for! I started by prepping the metal and used butyl tape and primer. It looks to me like the butyl tape sealed it in quite well, but I have heard that you can "paddle" in extra sealant around the outside edge. It does not look like it is needed, and if I did add extra it would cover the trim molding pins which were not all that covered in sealant when I removed the old windshield. Is the extra sealant needed or recommended? Any feedback is appreciated.


Attached Files Image(s)
               
Reply
#2
I would run a hose around the window to see if there are any leaks first. If you end up with a leak you could always apply more sealant. I went conservative with the sealant on my car since I have no plans on driving it in the rain (only getting caught in it) and did not notice any visible leaks (from what I saw).
Reply
#3
Sounds like Mike has given you some good advice.

I used the caulking form on mine.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  70 Mach 1 rear fold down install Masterblaster7212 5 6,405 02-28-2016, 02:19 AM
Last Post: BLACK JADE 69
  Brake and Fuel hard line install BKDunha 3 3,787 11-15-2012, 12:25 PM
Last Post: BKDunha

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
Bonnet latches
Last Post: JTS71 Mach1
02-13-2019 02:11 PM
» Replies: 2
» Views: 100
Vin Decoder
Last Post: JTS71 Mach1
02-13-2019 07:00 AM
» Replies: 7
» Views: 5286
Vin decoder
Last Post: Oztrailer
02-11-2019 07:56 PM
» Replies: 1
» Views: 157
UK Mach1
Last Post: JTS71 Mach1
02-10-2019 11:37 AM
» Replies: 1
» Views: 143
Ignition Timing
Last Post: JTS71 Mach1
02-10-2019 09:37 AM
» Replies: 23
» Views: 3799
"Jacobra"
Last Post: JTS71 Mach1
02-10-2019 09:18 AM
» Replies: 62
» Views: 14362
New Member
Last Post: Mustangmike
02-07-2019 09:25 PM
» Replies: 8
» Views: 465
hdshadpar
Last Post: JTS71 Mach1
02-06-2019 11:24 PM
» Replies: 2
» Views: 100
Fuse Panel on my ‘69
Last Post: 1969_Mach1
02-06-2019 06:28 PM
» Replies: 3
» Views: 242
66 Fairlane Project
Last Post: Mustangmike
02-03-2019 10:42 PM
» Replies: 542
» Views: 155827
1973 Mach 1 parts
Last Post: Steven Harris
02-03-2019 06:37 AM
» Replies: 5
» Views: 516
Newbie - Just brought this baby home
Last Post: Steven Harris
02-03-2019 06:33 AM
» Replies: 5
» Views: 569
This One's Funny!
Last Post: JTS71 Mach1
02-01-2019 10:08 AM
» Replies: 2
» Views: 359
Dash ignition light?
Last Post: JTS71 Mach1
01-21-2019 10:37 AM
» Replies: 3
» Views: 763
New addition to the stable..
Last Post: Steven Harris
01-16-2019 01:26 PM
» Replies: 5
» Views: 888
Alternator Light Won't go off
Last Post: 1969_Mach1
01-06-2019 05:35 AM
» Replies: 13
» Views: 2136
Merry Christmas 2018
Last Post: Steven Harris
12-30-2018 12:56 PM
» Replies: 10
» Views: 1171
Led lights not all that good.
Last Post: John
12-28-2018 02:12 PM
» Replies: 24
» Views: 9235
"70 Mach 1 Fuel Line Routing
Last Post: 1969_Mach1
12-28-2018 06:07 AM
» Replies: 1
» Views: 588
"70 Mach 1 with TCI torque Tube Rear Sus...
Last Post: 70MACH427
12-28-2018 05:31 AM
» Replies: 0
» Views: 465

>