putting on doors
#1
Was wondering if anyone had any tricks for putting on the doors having trouble with the upper hinge back plate keeps falling down. Thanks Jim.
Reply

#2
I haven't tackled the doors yet. Mine are getting close to needing it but only because the body line shows me its dropped down a little.
Each of my posts is a sincere attempt to correlate & compound the collective knowledge of this community for the benefit of myself & all Mach1 owners who read these pages today, and in the future!
Welcome all Mach1 enthusiasts were glad your here! Jump on in and spread all the knowledge you can.Rockxtreme


Current Vehicles:
2015 Harley-Davidson Electra Glide Ultra Classic
2014 Ford F150 Platinum 4x4 5.0
2013 Shelby GT500 SVT 20th Anniversary Edition
2013 Mustang GT 5.0
2007 Kawasaki Brute Force 750i 4x4
2006 Kawasaki Brute Force 750i 4x4
2006 Yamaha Raptor 700R
1979 Pontiac Trans Am

Sell your Mustang or Mustang Parts free!
   [Image: sellmymustang.JPG]


"Horsepower sells cars, torque wins races" - Carroll Shelby
My Mustang just used the gas your Prius saved. Thanks!

Phoenix Arizona
[Image: USA.gif]  [Image: Arizona_flag_32w.gif]
MY CURRENT MUSTANGS
updating
Reply

#3
No help here either. The body shop had my doors off, but I do not know what method they used to re installed them. Hopefully some one here knows the trick.
Northern Virginia
[Image: virginia.gif]

Mike AKA "Rare Pony"  & "Ole Pony"

We'll Be Friends Until We Are Old and Senile. Then We'll Be NEW Friends!

Current stable: 73 Mustang Convertible 250 CID Auto (owned since 1974), 04 Oxford White Mach 1, 4.6, Auto
Reply

#4
(08-09-2013, 02:20 AM)71 mach Wrote: Was wondering if anyone had any tricks for putting on the doors having trouble with the upper hinge back plate keeps falling down. Thanks Jim.

Plates inside the door should have tabs hammered over to keep them from falling out - but still be able to move

Ones on the body slip into the tabs then drop down a bit so they can freely move but not fall out

Look inside for a bent or broken tab

Also double check that you have them in the right locations - there are 4 different plates on the jambs

Don
Ohio Mustang Supply
NEW 65 - 73 parts
USED 71 - 73 parts
440-949-2556
donwitt@ohiomustang.com

VISIT US ON THE WEB AT
http://www.ohiomustang.com
Reply

#5
Thank you Don. It is the one in the pillar on top. Every time I go to put the bolts in it slides back and then falls down. When I put it in it does line up with the 2 tabs and the slides down into place. It just keeps sliding back and off though. Thanks Jim.
Reply

#6
Jim put it in place and tap / slightly snug up the tabs to help it stay in place - it still needs to move though
Ohio Mustang Supply
NEW 65 - 73 parts
USED 71 - 73 parts
440-949-2556
donwitt@ohiomustang.com

VISIT US ON THE WEB AT
http://www.ohiomustang.com
Reply

#7
Don has you on the right track - now all you need is persistence and some amazing dexterity.

You'll get it. Eusa_dance

We're cheering for you. Biggrin
[Image: Arizona_flag_32w.gif]
Southern Arizona
Current Mustangs:
1973 Mach 1

1971 Mustang Grande
1965 Mustang
[Image: stevenharris.jpg]
http://www.mexicomissionariesofcbt.blogspot.com/
Reply

#8
Thanks guys I'm going to try and put them on Sunday. Also Don do you guys at Ohio Mustang have a catalog you can send me. I usually buy from Mustangs unlimited and CJ Pony parts. I still need interior parts to complete my car. Thanks Jim.
Reply

#9
Let us know how it goes and share any tips you have for the next guy.
[Image: Arizona_flag_32w.gif]
Southern Arizona
Current Mustangs:
1973 Mach 1

1971 Mustang Grande
1965 Mustang
[Image: stevenharris.jpg]
http://www.mexicomissionariesofcbt.blogspot.com/
Reply

#10
(08-11-2013, 02:21 AM)71 mach Wrote: Thanks guys I'm going to try and put them on Sunday. Also Don do you guys at Ohio Mustang have a catalog you can send me. I usually buy from Mustangs unlimited and CJ Pony parts. I still need interior parts to complete my car. Thanks Jim.

Jim, no printed catalog - have the web site
Also have 1000's of used 71-3 parts
Let me know if I can help
Don

Actually just quoted a guy about a 72 Mach 1 upholstery kit CJ had on sale - He wanted a price match.
CJ was 1270.99
My regular price was 3.61 more - Yes I did take 3.61 off for him.

-Mach 1 Seat Upholstery 359.95
-Dash Pad 129.95
-Deluxe Door Panels with Hardware 314.95
-Watershield Set 15.00
-Carpet 197.95
& Underlayment 49.95
-Sunvisors 39.95
-Windlace not used on 71-3's
-Sill Plates with Decals 42.95
-Screw Kit 19.00
-Headliner 32.95
1202.60
72.00 shipping
1274.60

Ohio Mustang Supply
NEW 65 - 73 parts
USED 71 - 73 parts
440-949-2556
donwitt@ohiomustang.com

VISIT US ON THE WEB AT
http://www.ohiomustang.com
Reply



Possibly Related Threads...
Thread Author Replies Views Last Post
  NEED HELP PUTTING FENDERS ON!!!! 71 mach 10 7,039 08-23-2013, 10:40 PM
Last Post: Mustangmike

Forum Jump:


Users browsing this thread:
1 Guest(s)


Forum software by © MyBB Theme © iAndrew 2016