Ford plans its smallest engine ever

(Reuters) - Ford Motor Co is developing its smallest engine ever as part of its push to wring out greater fuel savings as gasoline prices rise and federal standards on fuel economy grow stricter.

The No. 2 U.S. automaker will introduce a 1.0-liter three-cylinder engine within the next two years. The engine will have the same performance as the widely used four-cylinder engine, but would save more fuel and lower emissions, Ford said.

"We just keep trying to find fuel economy improvements," Derrick Kuzak, Ford's head of product development, said on Thursday. "The only way you keep doing that is by finding new technologies and attention to detail."

Engines of this size are seen in smaller cars and motorcycles. At an event at Ford's product development center, Kuzak said the engine is "clearly aimed for small cars."

Ford also said on Thursday it would develop its own hybrid transmission, replacing one currently made by Japanese supplier Aisin. Ford is also planning an eight-speed transmission.

The move comes as automakers are developing more advanced powertrains and shaving weight from their vehicles to meet tightening federal standards regarding fuel economy.

By the 2016 model year, automakers' cars and trucks must get 35.5 miles per gallon on average, according to new federal fuel economy standards. Vehicles made by the top 14 automakers for the 2010 model year averaged 22.5 miles per gallon.

The three-cylinder engine would have EcoBoost technology, which includes turbocharging and direct injection. Kuzak called EcoBoost the "centerpiece" of Ford's fuel economy efforts.

Small engineering changes are helpful, Ford executives said. For example, the engine has an offset crankshaft that can boost fuel economy between 1 and 2 percent.

"It's a very subtle detail, but it's an important detail if you want to get to the absolute lowest fuel consumption possible with this engine," said Joe Bakaj, Ford vice president of global powertrain engineering.

The three-cylinder engine will be used in Ford vehicles worldwide, including the United States, but Ford did not specify which models.

The engine will be built at more than one plant, but Ford declined to say which of its plants worldwide could build it.

The hybrid transmission will be built at Ford's Van Dyke transmission plant in Detroit. Production starts late this year and full output is slated to start in early 2012.

The eight-speed transmission will also be built in the United States, but Ford did not specify where.
Each of my posts is a sincere attempt to correlate & compound the collective knowledge of this community for the benefit of myself & all Mach1 owners who read these pages today, and in the future!
Welcome all Mach1 enthusiasts were glad your here! Jump on in and spread all the knowledge you can.Rockxtreme

Current Vehicles:
2015 Harley-Davidson Electra Glide Ultra Classic
2014 Ford F150 Platinum 4x4 5.0
2013 Shelby GT500 SVT 20th Anniversary Edition
2013 Mustang GT 5.0
2007 Kawasaki Brute Force 750i 4x4
2006 Kawasaki Brute Force 750i 4x4
2006 Yamaha Raptor 700R
1979 Pontiac Trans Am

Sell your Mustang or Mustang Parts free!
   [Image: sellmymustang.JPG]

"Horsepower sells cars, torque wins races" - Carroll Shelby
My Mustang just used the gas your Prius saved. Thanks!

Phoenix Arizona
[Image: USA.gif]  [Image: Arizona_flag_32w.gif]

Leave it to Ford to be at the head of the pack even when it comes to the regulations imposed by the cronies that call themselves "servants" of the U.S. people.

First On Race Day has now also of necessity become First On Regulatory Demands.
[Image: Arizona_flag_32w.gif]
Southern Arizona
Current Mustangs:
1973 Mach 1

1971 Mustang Grande
1965 Mustang
[Image: stevenharris.jpg]

You could put one of those in the trunk to run the air conditioning! Laughing
Northern Virginia
[Image: virginia.gif]

Mike AKA "Rare Pony"  & "Ole Pony"

We'll Be Friends Until We Are Old and Senile. Then We'll Be NEW Friends!

Current stable: 73 Mustang Convertible 250 CID Auto (owned since 1974), 04 Oxford White Mach 1, 4.6, Auto

Possibly Related Threads...
Thread Author Replies Views Last Post
  Secret Mustangs that Ford never made MachnVegas 1 265 04-25-2018, 05:59 AM
Last Post: JTS71 Mach1
  50th Anniversary Ford Mustang Mach 1 Club 2 4,112 10-27-2013, 06:31 AM
Last Post: Rare Pony
  MACH 1 Returning to the Ford lineup! Mach 1 Club 4 5,121 10-01-2013, 06:37 AM
Last Post: Kit Sullivan
  Forget Amazon & Lowe's: Ford is the top brand in America Mach 1 Club 1 2,672 07-19-2013, 04:23 AM
Last Post: Steven Harris
  Ford to add 2,350 new jobs as part of investment plan Mach 1 Club 3 3,237 12-28-2012, 09:13 AM
Last Post: Mustangmike
  Ford to get blue oval back after second upgrade Mach 1 Club 3 3,271 05-24-2012, 02:53 AM
Last Post: Mach 1 Club
  First public appearance of the Ford Mustang Mach 1, Detroit Auto show, 1967 Mach 1 Club 2 3,064 04-13-2012, 12:32 PM
Last Post: Rare Pony
  Mustang & Ford Registeries Mach 1 Club 0 2,004 03-03-2012, 02:08 AM
Last Post: Mach 1 Club
  VIDEO - Ford 1967 Teme Lotus Racing Mach 1 Club 0 2,000 01-01-2012, 10:34 AM
Last Post: Mach 1 Club
  VIDEO - Ford 1950 1951 Mach 1 Club 0 1,974 01-01-2012, 10:11 AM
Last Post: Mach 1 Club

Forum Jump:

Users browsing this thread:
1 Guest(s)

Forum software by © MyBB Theme © iAndrew 2016