A Little Bit of Color!
#1
Well, I had to be away from the forum for a bit but it was for a good cause. I was able to spend some time working on my car!

For most owners that might be nothing more than going to the garage but for me it entails traveling to another country! My family and I live in Mexico where we do missionary work and the car at this time cannot travel with us. I am not sure that it ever will travel this way in that I am not too fond of having it taken off my hands by some gun toting drug thug who happens to like it or some unscrupulous official who wants one of those.

Anyway I travelled to Tucson to meet the family and bring them back from an Ohio visit and had a chance to put in a few hours in on the car. The windshield and the back glass were out of the car when I purchased it so I wanted to take the channels down to bare metal and ready them for glass install. As you can see I am also planning on changing the color of the car. It was originally 6E (Medium Bright Yellow) , now white but I hope to go with 6C (Medium Yellow Gold).

It was good therapy! Now if I could only work on it more frequently than every other month!


Attached Files Image(s)
                       
Reply
#2
When I was prepping mine for paint I found it hard to get too with it just sitting out in the garage; you gotta take advantage of any time you can. I like you tape job, pretty neat!
Reply
#3
Nice job Steve.And I dont blame you for not taking it with you.Bow
Reply
#4
Wow missionary that's awesome! Didn't know that brother. Your hands must be full trying to help some of those unwilling to receive!! Glad you have a refuse to get away for a time and enjoy your car hobby!
Reply
#5
Thank you.

I was further south for a few days but am safely home again. On a non-Mach 1 note: I can be found at: http://www.mexicomissionariesofcbt.blogspot.com/

Yes, I enjoy the respite of the Mach 1 to work on. I will enjoy it more when I can enjoy driving it. Not sure what most will think when the missionary pulls up in a yellow 1973 Mach 1 but those that know me, understand. Notallthere
Reply
#6
(04-13-2011, 03:36 AM)Steven Harris Wrote: Thank you.

I was further south for a few days but am safely home again. On a non-Mach 1 note: I can be found at: http://www.mexicomissionariesofcbt.blogspot.com/

Yes, I enjoy the respite of the Mach 1 to work on. I will enjoy it more when I can enjoy driving it. Not sure what most will think when the missionary pulls up in a yellow 1973 Mach 1 but those that know me, understand. Notallthere

I know you're a missionary and I understand. Lol
Reply
#7
Hey, hey, hey.

Tomorrow we are headed north to handle some business in the U.S. I hate crossing the border either way but will be glad to be back on U.S. soil!

Saturday morning I have made arrangements with a church contact in the Tucson area who does automotive glass to help me install the new windshield! Tomorrow I am suppose to have a package waiting on me from Ohio Mustang with the new rear glass gasket and will install that as well.

So, I will be absent for a few days but hope to have some progress to report when I do get back. I get to see my Mach 1!
Reply
#8
Sounds like a plan! Let us know how the install goes.
Reply
#9
Home Sweet Home!

Well we made it out and back in without much issue and I was able to get both the rear glass and the windshield installed! I was able to take a few pictures and will try to post some in a bit. Another step closer to a drive in my Mach 1!


You can see pictures of the install now on this thread: http://mach1club.com/showthread.php?tid=2915
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Mustang stripe color picker Mach 1 Club 7 8,434 08-03-2011, 09:32 AM
Last Post: JTS71 Mach1
  Mustang engine color how to paint engine 1969jimmach 0 3,169 01-25-2011, 08:11 AM
Last Post: 1969jimmach
  How to Paint a New Fender & Blend Color Mach 1 Club 0 2,800 08-28-2010, 06:59 PM
Last Post: Mach 1 Club

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Latest Threads
Tachometer Wiring
Last Post: 1969_Mach1
Today 05:03 AM
» Replies: 1
» Views: 23
66 Fairlane Project
Last Post: JTS71 Mach1
Yesterday 10:15 AM
» Replies: 524
» Views: 116653
New member 1969 Mach 1
Last Post: Mustangmike
Yesterday 09:00 AM
» Replies: 11
» Views: 955
351c wont start, help
Last Post: JTS71 Mach1
12-16-2018 08:26 AM
» Replies: 71
» Views: 4028
PCM keeps burning out have replaced for...
Last Post: Mustangbob
12-11-2018 10:58 AM
» Replies: 8
» Views: 502
70 Boss 302 - Night Mission build blog
Last Post: JTS71 Mach1
12-07-2018 01:12 PM
» Replies: 109
» Views: 69491
Alternator Light Won't go off
Last Post: 1969_Mach1
12-05-2018 11:56 AM
» Replies: 10
» Views: 640
"Jacobra"
Last Post: Steven Harris
12-04-2018 02:36 PM
» Replies: 55
» Views: 8977
My newest 1970 Mustang Fastback 302
Last Post: BLACK JADE 69
12-04-2018 12:08 AM
» Replies: 24
» Views: 2147
New guy with a question.
Last Post: 1969_Mach1
12-03-2018 06:57 AM
» Replies: 25
» Views: 1215
Dashboard lights REALLY dim, any fixes??
Last Post: Steven Harris
12-01-2018 12:04 PM
» Replies: 13
» Views: 13844
new member
Last Post: Steven Harris
12-01-2018 12:02 PM
» Replies: 4
» Views: 374
1971-73 "Clydesdales"
Last Post: Mister 4x4
11-29-2018 11:35 AM
» Replies: 26
» Views: 1392
Installing Factory gauges in a '71-'73 M...
Last Post: Mister 4x4
11-28-2018 03:26 AM
» Replies: 4
» Views: 869
Pictures and some info from a new guy
Last Post: Mister 4x4
11-28-2018 03:02 AM
» Replies: 18
» Views: 1571
Been Awhile... '71 Rustang
Last Post: Mister 4x4
11-24-2018 01:49 PM
» Replies: 143
» Views: 94025
1965 Fairlane (Mustangmike)
Last Post: JTS71 Mach1
11-23-2018 02:56 PM
» Replies: 14
» Views: 1159
Happy Thanks Giving!!!
Last Post: 1969_Mach1
11-23-2018 03:42 AM
» Replies: 2
» Views: 380
How not to Handle A DUI Checkpoint?!?!
Last Post: Vanbens91
11-14-2018 07:22 PM
» Replies: 1
» Views: 2188
Led lights not all that good.
Last Post: Mustangmike
11-14-2018 09:44 AM
» Replies: 20
» Views: 6092

>